Freelensing Cine® is a system that leaves the lens virtually suspended in front of the camera sensor allowing the operator a fast and intuitive movement. It allows for shifts, parallel and perpendicular to the focal plane, rotation of the optical center, and a combination of both pan and tilt movements. It allows to control the focal planes and to choose where to have them in the frame, both to increase the depth of field or to minimize it. Currently works with ARRI Alexa Mini, Mini LF, 35, Sony Venice 1 & 2, RED V-Raptor XL, V-Raptor and DSMC2, although each camera has its own characteristics.   MARRIAGE BETWEEN CAMERA and FREELENSING CINE®     Choose the appropriate camera mount (ARRI ALEXA MINI, MINI LF, 35, SONY VENICE 1 & 2, RED V-RAPTOR XL, V-RAPTOR & RED DSMC2) Fix the corresponding camera mount to the bellows Prepare de camera at the standard 19mm height Remove the PL or LPL mount that is placed on the camera body Insert the camera into the Freelensing Cine® or the other way around Align the Freelensing Cine® to the sensor of the camera Place the camera mount (already installed in the bellows of the Freelensing Cine® Set all Freelensing Cine® settings to “0” (except Z-axis) Finish adjusting Fix all camera peripherals (rods, etc)     WHAT MOVEMENTS DOES FREELENSING CINE® OFFER?   Y-Axis Shift Offset X-Axis Shift Offset Y-Axis Rotation (Tilt-Y) X-Axis Rotation (Swing-X) Z-Axis Shift Offset “Collimation” Combination of all the movements     OPERATING MANUAL FREELENSING CINE®https://www.bandpro.de/media/pdf/61/c3/ba/V-03-OPERATING-MANUAL-FREELENSING-CINE.pdf      

 2' and 4' slider combined in one Slider - unlimited and free your camera movements!Also with U-Bangi function! FEATURES No need for end supports in 4'-Slider mode, freeing up you dolly to do dolly thinks, like move 1/2 the size of other 4' sliders. Both upper and lower slides fitted with independent bearings, compunding overall slide length. Replaces 2', 2' and 4' sliders Use to use as an U-Bangi Slider Built for full size camera packages Rotating base with cross roller bearings, eliminating the need for clunky rotating offsets. Ultra quiet movement   TECH SPECS Heigh: 6" / 15,24cm Length: 29" / 73,66cm Width: 9.5" / 24,13cm Weight: 46.4lbs / 21,05kg Capacity: 15 - 100lbs / 6.8 - 45,4kg Mitchell mount (for now!) Ball Mount 150mm and 100mm coming soon   In the Box:  Slider Waterproof road case with custom high-density foam insert Toolset Low mode accessoriesOutrigger x2Leveling bipod x2 Choose Mitchell or Euro Mount as base *Solid base required for use without outrigger support.**Junior To 3/8 Thereaded Adapter to mount on slider stands not included / sold seperately*    #G-SSEUM Euro Mount Adapter for Slider available to purchase seperately.  

 Bowl Adapters for Slider - 75mm, 100mm and 150mm ball head.   FEATURES G-SSBA75: Bowl Adapter for 75mm ball head G-SSBA100: Bowl Adapter for 100mm ball head G-SSBA150: Bowl Adapter for 150mm ball head            

  Keep all your cables clearf of the Slider´s moving parts.              

Discover Flop Daddy™. This game-changing innovation instantly transforms any 4x4 floppy into a relaxing glare-free screening room, so you can focus on what really matters.Featuring a white outer layer to reflect the heat and a black interior to minimise monitor glare. Flop Daddy is ideal for everyone as: DOP/DP Camera Operator AC Director/AD Script DIT VAO Lighting Grip Make-up Wardrobe FX Stylist Agency Stunts ...   FEATURES Slips on to any 4x4 floppy Waterproof material 2 roll up sides with mesh window inner layer Travels in a sleek shoulder bag White outside - black inside - dual layer Nylon. Grab some Sand Noodles™ to slide into the sides of your Flop Daddy™ (or KUPO Floopy) if the wind picks up.    

    FEATURES Needed to put the Hudson Spider Slider to Monitor Stands Need two stand (vor example MSE or Kupo) to support the Slider   TECH SPECS Length: 4" / 10,16 cm Diameter: 1.125" / 2,85 cm (Junio Pin) Thread - Female 3/8” 16tpi