Upgrade Innovations DIT BOX MK4 Take your live grading and monitoring station anywhere a camera can go. Take your live grading and monitoring station anywhere a camera can go.  The DIT BOX is a collaborative design between credited Digital Imaging Technician, Chris Bolton, & Upgrade Innovations. The DIT BOX has a pull out machined internal frame that hard mounts the essential DIT components needed to do up to four camera live grading. For a list of the components, see below. The lightweight Pelican Air 1535 is modified with a rear back panel to accommodate 24 x Neutrik D-Series connectors and a 120mm silent fan. The DIT BOX is powered by a custom Cramped Attic 24 volt power distribution module with separate 20V and 12V kill switches and fan controller. With a primary and secondary 24V input, swap power inputs without components losing power. The modified Pelican case also features a removable top lid, removable BNC panel cover for transport and side and front mounted cheese plates with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc patterns for mounting accessories.  The Laptop Tray mounts to the DIT BOX laptop brackets to securely mount a 13″, 15″ or 16″ Macbook Pro. Optional accessories for the Laptop Tray are available for mounting to baby pin with a spigot adapter with our Quick Release VESA plate.  The base of the DIT BOX features a bottom bracket for mounting the included non-twist spigot adapter, a Ronford Baker QR plate or the Upgrade Innovations QR VESA Plate. The DIT BOX base is equipped with longer feet to rest properly with a QRP plate mounted underneath.What comes in the DIT BOX Modified Pelican Air 1535 with no foam Machined Aluminum Inner Bracket Assembly 1 x 5 port Ethernet Switch & 5x Ethernet cables 1 x Sonnet Echo Express SE 1 (NEW) 1 x Custom Enclosure for Sonnet Echo Express SE 1 for a Blackmagic PCIE Card (NEW) 1 x Laptop Tray with 2 tie-down M6 Thumb Screws 2 x Laptop clamps, 2x tie-down M6 Thumb Screws, 6x Spacer Plates 1 x 24Volt 350 Watt Power Supply with AC cable 1 x AC Power Supply Mounting Bracket (NEW) 1 x 120mm Silent Fan & Fan Guards 1 x DC Regulator and Distribution box with built in fan and 12V LEMO 0B Connectors (NEW) 1 x AJA Kumo power cable, 1x Cal Digit power cable, 2 x power cables for two Box IO’s 1 x Decimator power cable, 1 x Ethernet Switch power cable,  1x Sonnet PCIE card enclosure power cable 1 x open lead power cable 3 x Small Cheese Plate with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc mounting patterns (NEW) 1 x Bottom Mounting Bracket 4 x Delrin Feet 1 x Non-Twist C-Stand/Spigot adapter 1 x Rear cover plate for BNC and fan 2 x BNC Label Plates 1 x 24volt 6’ power extension cable 1 x Removable Lid Full set of video cable and BNC Neutrik connectors Includes mounting screws for all components The DIT BOX hard mounts the following devices: 2 to 3 x FSI BOX IO (not included) 1 x AJA 32×32 or 16×16 router (not included) 1 x Decimator Quad (not included) 1 x Cal Digit TS3+ or TS4 (not included) 1 x NetGear ProSafe GS105 (included) 1 x Sonnet Echo Express 1 in custom bracketry (included) 1 x Blackmagic Quad 2 or Duo 2 (not included) 1 x Custom 24Volt AC distribution and regulator module (included) 1 x 120mm silent fan (included) 24 x Neutrik D-Series Connectors (included)         Approx 44Ibs / 20kg with all devices installed        

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of the latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted to Monitor Mount, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening. This accessory works great with the Rudy Arm system or for using existing gear already in your kit.FEATURES 2.4″ length 15mm Mounting Spud Hard-mounts to latest Monitor Mount revisions via M5 thread. Mounts via 5/32 or 4mm Hex Key. 3/8 tapped thread for mounting accessories Comes with O-rings for customizing O-ring grooves. The O-ring selection allows you to control the 15mm clamp device: choose slip, friction or captive fit.Solidly built with Anodized Aircraft Aluminum. Caution – Using M5 thread on MMS12 Hinge Model for accessories will interfere with portrait swing due to clearance with Landscape/Portrait Monitor Plates. All other hinge models (MMS11, MMS11-MC & MMS09) have proper clearance for Landscape/Portrait functionality.

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of the latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted to Monitor Mount, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories. This accessory works great with the Spigot Adapters or for using existing gear already in your kit.FEATURES 2.2″ length 5/8 Baby Pin Hard-mounts to latest Monitor Mount revisions via M5 thread. Mounts via 5/32 or 4mm Hex Key. 3/8 tapped thread for mounting accessories Solidly built with Anodized Aircraft Aluminum Caution – Using M5 thread on MMS12 Hinge Model for accessories will interfere with portrait swing due to clearance with Landscape/Portrait Monitor Plates. All other hinge models (MMS11, MMS11-MC & MMS09) have proper clearance for Landscape/Portrait functionality.

The MMS11-MC Twin Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 55 lb/25kg, designed specifically for mobile cart/truck applications. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option. Chosen by professionals & rental houses to mount VESA standard monitors to 5/8” (16mm) male spigots or baby pins. Customize mount to your needs by choosing between four Monitor Plates to provide Landscape/Portrait and/or Quick Release functionality. For those that prefer fine view-angle adjustment, consider the Friction-Loc models.Threaded HolesMount accessories directly to the Monitor Mounts using the 1/4, 3/8 or M5 threaded hole. The M5 thread is for the new hars-mount 5/8 baby Pin or 15mm Spud to provide a non-twist mounting option. Mount these new accessories via 5/32 or 4mm Hex Key. The 5/8 baby Pin and 15mm Spud also provide a 3/8 tapped thread for mounting accessories and provide clearance for Landscape/Portrait Monitor Plates. Standard 1/4 & 3/8 threaded holes are also provided closer to the Monitor Plate. (NOTE: Landscape/Portrait Monitor Plates will interfere with accessories mounted to 1/4 & 3/8 threads) Ball-Loc SystemThe rosette style ball-lock is a positive locking system. Models coming with this system will have superior hold for heavier loads and long term use, on mobile carts or trucks. The locking system comes with heat treated ball bearings that are in-bedded in the locking surface and assured by limited lifetime warranty. This system is best for when static and dynamic forces are at play. VESA StandardThe VESA mounting plates are multi purpose and are compatible with 75/100mm standard. Adapters for 100 x 200 and 200 x 200mm are available. The thumbscrews stay on the mounting plate with the industry favourite captive design. Safety Cable ReadyThese models are all safety cable ready. The machined hole at the VESA mounting plate adapter allows you to feed a safety cable through for safe overhead mounting. Use in any application where safety is a concern. Mounting Plate Options: Standard OptionThe Standard mounting plate model comes with the VESA plate thumbscrews with our industry favorite captive design. Landscape/Portrait Option - LP SwingerThe LP-Swinger model is studio and green-screen friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor on an uneven surface. This mounting option vomes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen and stills work, as you can make use of the full monitor display screen. Quick Release Option - QRThe slim quick release plate mounts to the back of the back of your monitor taking up little space. This allows you to use much smaller storage/transport cases while keeping setup and take-down time to a minimum. The quick release option is great for camera-digital carts and mobile trucks. It comes with a locking latch that has a "hold open" option as well as a safety screw. This solid quick release mounting will pay for itself in no time, especially if time and space is an issue. Quick Release + Landscape/Portrait Option – QR+LP SwingerThelatest mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.Solidly built with Anodized Aircraft Aluminum & Stainless Steel. Supports up to 55 lb/25kg.

For those that already own our Monitor Mounts, the VESA Landscape/Portrait LP-Swinger Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the LP-Swinger assembly. The VESA LP-Swinger Mount Adapter fits all Upgrade Innovations monitor mounts.

For those that already own our Monitor Mounts, the VESA Quick Release + Landscape/Portrait Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the Quick Release + Landscape/Portrait assembly. The VESA Quick Release + Landscape/Portrait Mount Adapter fits all Upgrade Innovations monitor mounts. Purchase the full assembly #12015 or either the QR-L/P receiver plate #12090 or QR monitor plate #12005_02 to build out your QR setup.

For those that already own our Monitor Mounts, the VESA Quick Release + Landscape/Portrait Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the Quick Release + Landscape/Portrait assembly. The VESA Quick Release + Landscape/Portrait Mount Adapter fits all Upgrade Innovations monitor mounts. Purchase the full assembly #12015 or either the QR-L/P receiver plate #12090 or QR monitor plate #12005_02 to build out your QR setup.

For those that already own our Monitor Mounts, the VESA Quick Release + Landscape/Portrait Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the Quick Release + Landscape/Portrait assembly. The VESA Quick Release + Landscape/Portrait Mount Adapter fits all Upgrade Innovations monitor mounts. Purchase the full assembly #12015 or either the QR-L/P receiver plate #12090 or QR monitor plate #12005_02 to build out your QR setup.

The VESA Quick Release Mount Adapter is the perfect option to upgrade your monitor with Quick Release compatibility. Take your QR outfitted monitor and mount it to your monitor arms or brackets on your cart, van or office.The VESA Quick Release Receiver Plate fits all Upgrade Innovations monitor mounts via the 1/4-20 Flat Head Mounting Pattern. The VESA Quick Release Mount Adapter is a universal QR adapter kit to securely attach the VESA Quick Release Receiver Plate to VESA 75mm compatible third party stands, brackets, arms or wall mount. Additional components are provided to mount the Quick Release Receiver Plate  to compatible third party VESA mounts via the VESA 75mm pattern. The Quick Release Monitor Plate fits FDMI VESA 75/100mm monitors. Purchase the full assembly or the QR receiver plate or QR monitor plate separately to build out your QR setup. Purchase the full assembly or the QR receiver plate #12010 or QR monitor plate #12005 separately or QR Receiver Plate #12047 to build out your QR setup.

The VESA Quick Release Mount Adapter is the perfect option to upgrade your monitor with Quick Release compatibility. Take your QR outfitted monitor and mount it to your monitor arms or brackets on your cart, van or office.The VESA Quick Release Receiver Plate fits all Upgrade Innovations monitor mounts via the 1/4-20 Flat Head Mounting Pattern. The VESA Quick Release Mount Adapter is a universal QR adapter kit to securely attach the VESA Quick Release Receiver Plate to VESA 75mm compatible third party stands, brackets, arms or wall mount. Additional components are provided to mount the Quick Release Receiver Plate  to compatible third party VESA mounts via the VESA 75mm pattern. The Quick Release Monitor Plate fits FDMI VESA 75/100mm monitors. Purchase the full assembly or the QR receiver plate or QR monitor plate separately to build out your QR setup. Purchase the full assembly or the QR receiver plate #12010 or QR monitor plate #12005 separately or QR Receiver Plate #12047 to build out your QR setup.

The VESA Quick Release Mount Adapter is the perfect option to upgrade your monitor with Quick Release compatibility. Take your QR outfitted monitor and mount it to your monitor arms or brackets on your cart, van or office.The VESA Quick Release Receiver Plate fits all Upgrade Innovations monitor mounts via the 1/4-20 Flat Head Mounting Pattern. The VESA Quick Release Mount Adapter is a universal QR adapter kit to securely attach the VESA Quick Release Receiver Plate to VESA 75mm compatible third party stands, brackets, arms or wall mount. Additional components are provided to mount the Quick Release Receiver Plate  to compatible third party VESA mounts via the VESA 75mm pattern. The Quick Release Monitor Plate fits FDMI VESA 75/100mm monitors. Purchase the full assembly or the QR receiver plate or QR monitor plate separately to build out your QR setup. Purchase the full assembly or the QR receiver plate #12010 or QR monitor plate #12005 separately or QR Receiver Plate #12047 to build out your QR setup.

The Whaley Rail II is a collaborative design between Ben Whaley (667 DIT) & Upgrade Innovations. This system provides DIT’s with a solid lightweight mounting frame to hold multiple production monitors and other accessories.Designed to integrate with Inovativ Echo without needing holes drilled through the cart deck, the Whaley Rail II can also be mounted to other Inovativ carts, including Scout, Voyager & Apollo models. The Whaley Rail can be built to practically any cart deck, so other camera carts such as Adicam, Magliner & Yaegar among others can be upgraded with this professional monitor mounting frame.The modular mounting rails eliminate unwanted motion & provide strength and stability, while still allowing for horizontal and vertical adjustments. You can customize your Whaley Rail II to be either a single or double rail system, offering various setup options for monitors and accessories. Both the single rail and double rail systems include two rail clamps to 5/8 baby pin in the base setup. For a tight location move or for transport, quick release the Whaley Rail II frame from the deck via tool-less levers. Control height and various frame positions to maximize and respect the length and depth of your cart build. This modular design allows for various options including the Packed and Studio versions and provides build flexibility.The build flexibility allows for the Whaley Rail components to be easily moved between multiple cart sizes so you can adapt to your project scope. With a few extra components, swap your rail frame to another cart by making use of a different length cross rail. The Packed and Studio versions have established rail lengths and vertical post heights based on cart model length. The Whaley Rail II system is designed to integrate with our popular Ball-Lock Monitor Mounts and Quick Release VESA Plates. The Ball-Lock system is a positive-lock system for rock solid monitor support when static and dynamic forces are at play. Check out the MMS09 VESA Mount, MMS11-MC VESA Mount and the Quick Release VESA Plate.

Add additional Rail Clamps to your Whaley Rail II system. Rail clamp is easily quick released and added to rail system, providing a solid clamp to the 1″ round-edge square rail. Mounting patterns include 1/4-20 and 3/8-16 on front, top and bottom of clamp for the VESA monitor plates, 5/8 Baby Pins or articulating arms.FEATURES Quick Releases off rail with two full turns of adjustable lever Extremely solid clamp, rated for heavy production monitors Direct mount the Quick Release VESA Plates via 1/4-20″ mounting pattern. 5/8 Baby Pins mount either via male 3/8 thread to offset tapped hole or inline with rail via female 3/8 thread using the SHCS through the Rail Clamp.Solidly built with Anodized Aircraft Aluminum.Weight: 0.315kg / 0.70lbs

Add additional Rail Clamps to your Whaley Rail II system. Rail clamp is easily quick released and added to rail system, providing a solid clamp to the 1″ round-edge square rail. Mounting patterns include 1/4-20 and 3/8-16 on front, top and bottom of clamp for the VESA monitor plates, 5/8 Baby Pins or articulating arms.FEATURES Quick Releases off rail with two full turns of adjustable lever Extremely solid clamp, rated for heavy production monitors Direct mount the Quick Release VESA Plates via 1/4-20″ mounting pattern. 5/8 Baby Pins mount either via male 3/8 thread to offset tapped hole or inline with rail via female 3/8 thread using the SHCS through the Rail Clamp.Solidly built with Anodized Aircraft Aluminum.

The Whaley Rail II Vertical Post End Plug to 3/8 is an optional accessory to your Whaley Rail II Monitor Frame System. End Plug jams into our 1.5″ Vertical Post by using a 5/32 or 4mm Allen Key to provide a 3/8-16″ tapped thread for mounting further accessories. Mount baby pins for wireless antennas or make use of both posts to frame up a rain cover or blackout tent. Dowel Pin acts as stop to prevent plug falling through post.