Use this 15mm Studio Support Kit  for both cameras: EOS C300 MKIII and EOS C500 MK II. Included in box: Basic Set for Canon C300 MKIII/ C500 MkII - #KK.0033625 LMB 4x5 Pro Set - #KK.0015177 LMB 4x5 Clamp Adapter Set - #KK.0015133 Follow Focus FF-5 Cine Set Pro - #K0.60144.0 | KK.0005758 Adapter FF-5 for 15mm Studio Support - #K2.47630.0 Lens Support LS-10 for 15mm Studio - #K2.47228.0 Universal Bridge Support UBS-3 - #K2.0013320 Bridge Plate BP-9 - #K2.0031435 Bottom Dovetail Plate 300mm/12in - #K2.0015896 Support Rods 340mm, Ø15mm - #K2.66252.0 Handgrip without on/off switch - #K2.47861.0 Handgrip Extension, long - #K2.47863.0 Shoulder Belt Adapters - #K2.0001223 Rod Mounting Bracket RMB-3 - #K2.0006186  

Use this 19mm Studio Support Kit  for both cameras: EOS C300 MKIII and EOS C500 MK II. Included in box: Basic Set for Canon C300 MKIII/ C500 MkII - #KK.0033625 LMB 4x5 Pro Set - #KK.0015177 LMB 4x5 Clamp Adapter Set - #KK.0015133 Follow Focus FF-5 Cine Set Pro - #K0.60144.0 | KK.0005758 Adapter FF-5 for 19mm Studio Support - #K2.47629.0 Lens Support LS-9 for 19mm Studio - #K2.47227.0 Universal Bridge Support UBS-3 - #K2.0013320 Bridge Plate BP-8 - #K2.0031436 Bottom Dovetail Plate 300mm/12in - #K2.0015896 Support Rods 340mm/13.4in, Ø19mm - #K2.66269.0 Handgrip without on/off switch - #K2.47861.0 Handgrip Extension, long - #K2.47863.0 Shoulder Belt Adapters - #K2.0001223 Rod Mounting Bracket RMB-3 - #K2.0006186  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0017138, Bridge Plate Adapter BPA-5 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043731, Side Bracket Right for Sony Venice 1/2 K2.0043725, Side Bracket Left for Sony Venice 1/2 K2.0017138, Bridge Plate Adapter BPA-5 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4 K2.0021525, EVF bracket for Sony DVF-EL200 (Venice) K2.0006140, Mini Viewfinder Bracket MVB-1  

Combining the compact size and low weight of the popular ALEXA Mini with the large-format ALEXA LF sensor, ALEXA Mini LF brings exciting new creative possibilities to ARRI's large-format camera system. The LF camera system consists of the high-speed ALEXA LF and ALEXA Mini LF cameras, ARRI Signature Prime lenses, LPL lens mount, PL-to-LPL adapter, and Lens Data System LDS-2. The combined feature sets and form factors of ARRI's two large-format cameras encompass al on-set requirements.FEATURES Immersive large-format look Lower noise with higher usable sensitivity Highes dynamic range of any production camera ARRI color science for natural skin tones, easy color correction and clean VFX Perfect for High Dynymic Range (HDR) and Wide Color Gamut (WCG) displays Robust and reliable Easy to operate and use on set Fast and efficient workflows Internal recording to new Codex Compact Drive Uncompressed and unencrypted MXF/ARRIRAW Fast and efficient MXF/Apple ProRes New Codex Compact Drive 1TB is small, tough and cost-efficient Affordable Compact Drive Reader works without license or extra software Compact Drive Adapter is compatible with SXR Capture Drive Docks New MVF-2 high-contrast HD viewfinder HD OLED display, color science and ARRICAM eyepiece like ALEXA LF EVF-2 Optimal judgement of focus, dynamic range and color Stable color balance through temperature-controlled display Large 4" flip-out monitor shows image or camera menu Three operation medes: single operator, crew or remote New flexible and reliiable CoaXPress VF cable, up to 10 m/33 ft The ALEXA Mini LF uses the same sensor as the ALEXA LF. This is the ALEV 3 A2X sensor, which has the same photosite size and type as the Super 35 ARRI digital cameras. It has 4448 x 3096 photosites (yes, it is therefore a 4.5K sensor) and measures 36.70 x 25.54 mm. The ALEXA Mini LF (left) has the same dimensions and the same mounting points as the ALEXA Mini (right), except for the media bay on the camera left side. Our current prototypes weigh in at 2.6 Kg/5.7 lbs for the camera body with LPL lens mount and 800 g/1.7 lbs for the MVF-2 viewfinder.Arri-Alexa-LF-two-sidesAdditional new features Three internal, motorized large-format FSND filters: ND 0.6, 1.2 and 1.8 New dedicated, regulated 12 V and 24 V accessory power outputs New SYNC IN and improved AUDIO connectors Two built-in microphones Six user buttons on camera's left side One LOCK button each for camera and viewfinder Additional external WiFi antenna Easier access to media, VF and TC connectors Great system compatibility Same sensor and recording formats as ALEXA LF Compatible with LPL and PL mount lenses, Super 35 and full frame Supports all anamorphic de-squeeze ratios Compatible with almost all ALEXA Mini accessories Compatible with ARRIand cmotion wireless remote systems Works with 12 V and 24 V on-board batteries (~65 W power draw) 

The Base Plate for the Venice Extension Unit is compatible with the BPA-5 and the ENG-style shoulder bottom part from the plate for Sony Venice. Like with the Sony Venice both can be easily attached by sliding them on and off from front or back. The release button is accessible from both sides.15mm lightweight rod support standard is integrated. ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. FEATURES The Base Plate fo the Venice Extension Unit is compatible with the BPA-5 and the ENG-style shoulder bottom part from the plate for Sony Venice. Like with the Sony Venice both can be easily attached by sliding them on and off from front or back. The release button is accessible from both sides. 15mm lightweight rod support standard is integrated. ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented.  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043749, Broadcast Shoulder Adapter BSA-1 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4  

Get ready to shoot with this Basic Set for Sony VENICE from ARRI, comprising a dedicated shoulder plate, a BPA-5 bridge plate adapter, a pair of 13" 15mm lightweight stainless steel rods, and a QRP-1 quick release plate. The plate features integrated front and back 15mm LWS rod clamps and an adjustable shoulder pad, and interfaces with the QRP-1 for easy attachment to a tripod. The BPA-5 bridge plate adapter allows you to quickly transfer your VENICE from the shoulder plate to a separately available cine-style bridge plate.  

The Back Plate can be mounted either at the top or at the bottom of the back and it is also compatible with the Repeater Unit (an extension cable) for either horizontal or vertical attachment.It offers plenty of interfaces (1/4”-20; 3/8”-16 with anti-twist pin holes). ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. FEATURES The Black Plate can be mounted either at the top or at the bottom of the back and it is also compatible with the Tepeater Unit (an extensio´n cable) for either horizontal or vertical attachment. It offers plenty of interfaces (1/4"-20, 3/8"-16 with anti-twist pin holes). ARRI's Multi Hex screws - compatible with HEX 3, HEX 4, HEX 5 and 5/32" are implemented. Weight: 46 g

The Bridge Plate Adapter BPA-5 allows quick transfer from shoulder camera to cine style bridge plates such as BP-8 and BP-9. It is compatible with the upper part of the “Plate for Sony Venice” (K2.0017137).  

The Cable Clamp works as a strain-relief for the cable which connects the Extension Unit to the Venice camera body and recording unit. It is compatible with the Side Bracket Right. FEATURES The Cable Clamp works as a strain-relief for the cable which connects the Extension Unit to the Venice camera body and recording unit. It is compatible with the Side Bracket Right K2.0024566 Weight: 28 g

The CCH-4 is a completely closed top handle and is compatible to most of the ARRI PCA top plates (not compatible with the top plate for RED, C300 MkII, Sony A7 and the MAP-1 and 2 from the ALEXA Mini). Numerous of interfaces (1/4-20”; 3/8-16”; M4) for additional accessories (e.g. RMB-3) are integrated. The CCH-4 can be mounted onto the Top Plate for the Sony Venice in three different positions and is compatible with the Sliding Adapter for the CCH-4 (K2.0019282).  

The ARRI Pro Set for Sony PXW-FS7/FS72 provides a range of components designed to support and add accessories to your FS7 or FS7M2 HD camera. This set includes an adapter base plate with an integrated 15mm rod bracket, a built-in shoulder pad, a detachable 15mm rod console, two pairs of 15mm rods, a lens adapter support, a top cheese plate, a CCH2 carrying handle, and a viewfinder bracket. The flexible adapter plate is compatible with bridge plates like the ARRI BP-8 and BP-9, and with VCT-style tripod adapters. Extended rosettes on the plate will accommodate the original Sony handgrip or any rosette-based grip. For handheld operating comfort, a contoured shoulder pad is integrated into the adapter plate.This set's two pairs of 15mm rods, the adapter plate's built-in rod holders, and the included 15mm rod console provide front and rear support for 15mm rod-based accessories. The included LAS-1 lens adapter support offers a sturdy foundation for pillar-style PL, EF, and other lens adapters. The top plate and the CCH2 handle include 3/8"-16 threaded accessory mounts, and the top plate has a measuring tape stud lining up with the camera's "film plane." For increased viewing comfort, use the viewfinder bracket to ergonomically position the Sony EVF.Key Features     For Sony PXW-FS7/FS7M2 Cameras     Base Plate Fits Bridge & VCT Plates     Front & Back 15mm LWS Rod Support     2 x Pairs of 15 mm Rods (9" & 5.5") Included in Box     1 x K2.0003684 - Adapter Plate für Sony PXW-FS7/FS7II     1 x K2.0003899 - Lens Adapter Support LAS-1     1 x K2.66253.0 - Support Rods 240 mm (9.4"), Ø 15 mm     1 x K2.0003722 - Top Plate für Sony PXW-FS7     1 x K2.73002.0 - Center Camera Handle, CCH-2     1 x K2.0003749 - Viewfinder Bracket für Sony PXW-FS7     1 x K2.65264.0 - 15 mm LWS Rod Console     1 x K2.66254.0 - Support Rods 140 mm (5.5"), Ø 15 mm    

Includes Top Plate for Canon C500 MkII K2.0033441, Plate for Canon C500 MkII - K2.0033439, Bridge Plate Adapter BPA-5 - K2.0017138, Camera Center Handle CCH-4 - K2.0017270, Sliding Adapter for CCH-4 - K2.0019282, Rod Mounting Bracket RMB-3 - K2.0006186, 15mm Reduction Insert -K2.66255.0, Mini Viewfinder Bracket MVB-1 - K2.0006140, Monitor Bracket - K2.0015520 and Support Rods 340mm, Ø15mm K2.66252.0.The Top Plate for C500 MkII offers a variety of 1/4-20"; 3/8-16" and M4 threads for additional accessory support such as the RMB-3, CCH-4 (CCH-4 Sliding Adapter option) or CCH-2. An integrated optically centered 15mm lightweight support interface allows to mount 15mm rods or the Mini Viewfinder Bracket MVB-1 (K2.0006140). The C500 MkII monitor (via the Monitor Bracket for Canon C200 K2.0015520) or Canons C700 EVF (via K2.0013195 EVF bracket for C700) can be attached to the MVB-1.The K2.0033439 Plate for C500 MkII can be used either shoulder mounted compatible with a VCT-14 style plate such as the QRP-1 or by using the Bridge Plate Adapter BPA-5 to mount the cine-style BP-8, BP-9 or BPS-2. Both versions can be changed easily to the front and the back by sliding and exchanging one against the other without the need to detach any accessories from the camera. The plate includes an interface for two 15mm rods at the front and an optional 15mm lightweight support at the back (15mm rods included).Included in box     1x Top Plate for Canon C500 MkII K2.0033441     1x Plate for Canon C500 MkII - K2.0033439     1x Bridge Plate Adapter BPA-5 - K2.0017138     1x Camera Center Handle CCH-4 - K2.0017270     1x Sliding Adapter for CCH-4 - K2.0019282     1x Rod Mounting Bracket RMB-3 - K2.0006186     1x 15mm Reduction Insert -K2.66255.0     1x Mini Viewfinder Bracket MVB-1 - K2.0006140     1x Monitor Bracket - K2.0015520     1x Support Rods Pair 340mm, Ø15mm K2.66252.0.    

The Plate for Sony Venice with two integrated 15mm lightweight supports (at the front and the back) and a comfortable shoulder pad can be adjusted for perfect balancing. The plate is compatible with VCT-style tripod adapters such as the QRP-1 from ARRI.  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043731, Side Bracket Right for Sony Venice 1/2 K2.0043725, Side Bracket Left for Sony Venice 1/2 K2.0043749, Broadcast Shoulder Adapter BSA-1 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4 K2.0021525, EVF bracket for Sony DVF-EL200 (Venice) K2.0006140, Mini Viewfinder Bracket MVB-1  

Get ready to shoot with your Sony VENICE with this Pro Set from ARRI, comprising a dedicated shoulder plate, a BPA-5 bridge plate adapter, a dedicated top plate, a CCH-4 camera center handle, an RMB-3 rod-mounting bracket, a pair of 13" 15mm lightweight stainless steel rods, and a QRP-1 quick release plate. The plate features integrated front and back 15mm LWS rod clamps and an adjustable shoulder pad, and interfaces with the QRP-1 for easy attachment to a tripod. The BPA-5 bridge plate adapter allows you to quickly transfer your VENICE from the shoulder plate to a separately available cine-style bridge plate. The top plate enables low-angle shots, offers numerous accessory threads, and allows you to mount the CCH-4 center handle in one of three different positions. Lastly, the RMB-3 bracket supports a single 19mm rod, or a 15mm rod via a separately available reduction insert, and is well suited to accessories such as lens motors and lightweight viewfinder mounts.  

ARRI Sony Venice Extension Unit Set Pro. The Sony Venice Extension Unit “Rialto 1+2” is an add-on to the Venice camera. It allows to separate the sensor unit from the recording unit connected through a cable. The accessories from ARRI PCA therefore are based on an addition to the existing accessories for the Sony Venice camera. For using all features, ARRI recommend using the “Rialto” accessories with the Venice accessories from ARRI PCA. FEATURES The existing ARRI PCA accessories are compatible with the “Rialto” accessories Compact and lightweight design of all components All components can be mounted individually (top, bottom, sides and back) An additional cable clamp prevents the cable connected to the sensor unit from getting damaged When using the Side Bracket Right vertical shooting is possible as well Includes:K2.66253.0 1x Support Rods 240mm/9.4in, Ø15mmK2.66254.0 1x Support Rods 140mm/5.5in, Ø15mmK2.66227.0 1x Cage Top Handle, CTH-1K2.66255.0 1x 15mm Reduction InsertK2.65264.0 1x 15mm LWS Rod ConsoleK2.0024564 1x Base Plate for Venice Ext. UnitK2.0039457 1x Top Plate for Venice Ext. UnitK2.0024566 1x Side Bracket Right for Venice Ext. UnitK2.0024761 1x Side Bracket Left for Venice Ext. UnitK2.0024569 1x Cable Clamp for Venice Ext. UnitK2.0024574 1x Rosette Adapters, RA-6, pairK2.0024573 1x Back Plate for Venice Ext. UnitK2.0024965 1x Wooden Handgrip WHG-1K2.0006186 1x Rod Mounting Bracket RMB-3K2.0047941 1x Back Plate 2 for Venice Ext. UnitK2.0017138 1x Bridge Plate Adapter BPA-5

The ARRI QRP-1 Quick-Release Plate is compatible with the ARRI AMIRA camera, select ARRI support systems, and many industry-standard broadcast cameras. The VCT wedge design enables you to quickly attach and remove your camera from the plate using the lever release. FEATURES Quick release plate with lever release VCT-style plate enables quick mounting and removal of camera For ARRI AMIRA, select ARRI support systems, and many industry-standard broadcast cameras  

The RMB-3 supports a single 19 mm rod (15 mm rod via reduction insert K2.66255.0) and is well suited to accessories such as lens motors or lightweight viewfinder mounts.  

The Rosette Adapters allow the user to attach rosettes on four different positions on both side brackets. They will be attached by two screws and are rock solid.ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4 and 5/32” are implemented. FEATURES The Rosette Adapters allow the user to attach rosettes on four different positions on both side brackets. They will be attached by two screws and are rock solid. ARRI's Multi HEX screws - compatible with HEX 3, HEX 4 and 5/32" are implemented. Weight: 77 g

The Side Bracket Left offers plenty of interfaces (1/4”-20; 3/8”-16 with anti-twist pin holes; RMB-3; RA-6, Wooden Handgrip WHG-1 and for the base plate to be used for vertical shooting)ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. FEATURES The Side Bracket Left offers plenty of interfaces (1/4”-20, 3/8”-16 with anti-twist pin holes, RMB-3, RA-6, Wooden Handgrip WHG-1 and for the base plate to be used for vertical shooting). ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. Weight: 67 g

The Side Bracket Right offers plenty of interfaces (1/4”-20; 3/8”-16 with anti-twist pin holes; RMB-3; RA-6, Wooden Handgrip WHG-1, Cable Clamp and for the base plate to be used for vertical shooting)ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. FEATURES The Side Bracket Right offers plenty of interfaces (1/4”-20, 3/8”-16 with anti-twist pin holes, RMB-3, RA-6, Wooden Handgrip WHG-1, Cable Clamp and for the base plate to be used for vertical shooting). ARRI´s Multi Hex screws – compatible with HEX 3, HEX 4, HEX 5 and 5/32” are implemented. Weight: 67 g

The sliding adapter enables the CCH-4 to slide back and forth for finding the perfect balancing point on the camera. It can be mounted in different positions on following ARRI top plates: Canon C200, Canon C700, Panasonic EVA-1, VariCam, Sony PMW F5/F55, Sony PXW-FS7/FS7II.