Using a 12-Channel Bi-voltage Wall charger is a convenient way to make sure all your batteries are always ready for the set. Best suited for rental houses. The Kit includes screws and plates for wall-mounting. And it only uses one power cable. With three switches, you can power just four channels at once – or all twelve together. The sturdy aluminum housing and three fans on top make sure the device doesn’t overheat. The indicators show the battery charging status. Easy to use – with a big impact on charging control.Specifications
Input: 100~240VAC 47~63Hz
Charging Output: 16.8V/4.0A or 29.4V/2.0A
Power: 1000W
Dimensions: 785(L)mm*540(W)mm*103(H)mm Weight: 13.9kg
Indicators show charging status
In the box
1 × PL-Q4B12BV - 12 CH Wall Charger
1 x Power Cable
This Charger has two channels that are compatible with our Sony BP-U batteries. It features a USB-A Output.Specifications
Input: 100~240VAC 47~63Hz
Output: 16.8V/1.5A*2
USB Output: 5.0V/1.0A
Power Draw: 60W (Max)
Dimensions: 165(L)mm×103 (W) mm×61(H)mm
Weight: 540g
In the box
1 × PL-U65 - 2 CH Charger for Sony BP-U
1 × Power Cable
All our Chargers offer automatic Voltage detection ranging from 100 – 240VAC 47-63Hz. This opens the possibilities to travel with your charger anywhere in the world without even thinking about the different voltages. Fast Chargers charge your batteries with a current of 4 to 4.5 Amps. Normal Chargers charge your battery with 2 Amps. This means that your charging time is cut in half.Specifications
Input: 100-240V 47-63Hz
Output: 16.8V / 4.0A (each channel)
Power Draw: 150W
Features: Two channels simultaneous charging with 4 Amps per Channel
Dimensions: 135(L)mm*90(W)mm*225(H)mm
Weight: 920g
In the box
1 × PL-Q280B - 2 CH Fast Charger
1 x Power Cable
The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won't be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps - you can get a maximum of 15 Amps Output.The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a maximum loss in sub zero temperatures of half the capacity.A 4-level indicator shows you the remaining capacity. There's a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.Specifications
Capacity: 10.5Ah 270Wh
Voltage: 26V
D-Tap In- / Output: Yes (1x) 26V
Current: 15.0A(max.)
Dimensions: 152(L)mm×97(W)mm×65(H)mm
Weight: 1.190g
In the box
1 × BP7S270 - 270Wh/26V Battery VM
All our Chargers offer automatic Voltage detection ranging from 100 – 240VAC 47-63Hz. This opens the possibilities to travel with your charger anywhere in the world without even thinking about the different voltages. Fast Chargers charge your batteries with a current of 4 to 4.5 Amps. Normal Chargers charge your battery with 2 Amps. This means that your charging time is cut in half.Specifications
Input: 100-240V 47-63Hz
Output: 16.8V / 4.0A (each channel)
Power Draw: 300W
Features: Four channels simultaneous charging with 4 Amps per Channel
Dimensions: 281(L)mm*145(W)mm*191(H)mm
Weight: 2.500g
In the box
1 × PL-Q480B - 4 CH Fast Charger
1 x Power Cable
Let us introduce to you our Smart Charger, which is a fast charger but with the extra information that smart batteries with the SMBUS system can display.For smart batteries with SMBUS system, the charger will show battery capacity percentage, capacity, charging voltage, chargingcurrent, remaining charging time and cycle. For normal batteries without SMBUS system, it will show charging voltage / charging current / current and Battery Capacity only.SpecificationsInput: 100-240V 47-63HzOutput: 16.8V / 4.0A (each channel)Power Draw: 300WFeatures: supports SMBUS compatible battery information, also simultaneous charging Dimensions: 281(L)mm*145(W)mm*191(H)mmWeight: 2510gIn the box1 × PL-Q4BL - 4 CH Smart Charger1 x Power Cable
1 Channel D-Tap Quick Charger
FEATURES
365g
Spiral Cable
16,8V 5A
SPECIFICATIONSModel S1micro Port DTap Channel 1 Charging Current 16,8V / 5,0A DC Output 16,5V / 5,0A DC Port DTap AC in 90-264V / 47-63Hz AC Adapter UK, US, EU Operating Temp. Range -10°C +35°C Weight 0,365Kg Dimensions (W x H x D) 40 x 138 x 60mm Warranty 2 Years Batteries bebob with Twist Dtap Port Charging Time 45micro: 45 Min 98micro: 1 Hr 15 Min 150micro: 1 Hr 45 Min
2 Channel Micro Simultaneous Quick Charger
FEATURES
530g
Parallel
16,8V 5A
SPECIFICATIONSModel VS2micro Port Vmicro Channel 2 Charging Current 16,8V / 2,5A DC Output 16,5V / 10,0A (Powerbase) DC Port DTap AC in 90-264V / 47-63Hz AC Adapter UK, US, EU Operating Temp. Range -10°C +35°C Weight 0,530Kg Dimensions AC ADapter (W x H x D) 40 x 138 x 60mm Dimensions Powerbase (W x H x D) 66 x 92 x 45mm Warranty 2 Years Compatible with Vmicro batteries VMount batteries VCine batteries Charging Time 2 V45micro: 1 Hr 30 Min 2 V98micro: 2 Hrs 30 Min 2 V150micro: 3 Hrs 30 Min
2 Channel V-Mount Simultaneous charger
FEATURES
built in AC Adapter 82W DC
Powerbase Function
Weight: 1,0Kg
SPECIFICATIONSModel VS2-RL Mount V-Mount Channel 2 simultaneous Charging Current 16,8V / 2,5A DC Output 16,5V / 5,0A DC Port XLR 4 1minus 4plus AC in 90-264V / 47-63Hz Operating Temp. Range -10°C +35°C Weight 1,0Kg Dimensions (W x H x D) 110 x 231 x 141mm Warranty 2 Years Batteries bebob, Idx®, Sony®
4 Channel Vmicro Simultaneous Quick Charger
FEATURES
built-in AC Adapter 80W DC
Powerbase Function
Weight: 1,0Kg
SPECIFICATIONSModel VS4micro Interface Vmicro Channel 4 simultaneous Charging Current 16,8V / 1,25A DC Output 16,5V / 5,0A DC Port XLR 4 1minus 4plus AC in 90-264V / 47-63Hz Operating Temp. Range -10°C +35°C Weight 1,0Kg Dimensions (W x H x D) 60 x 231 x 141mm Warranty 2 Years Compatible with Vmicro batteries (4 pieces) VMount batteries (2 pieces) VCine batteries (2 pieces) Batteries bebob, Idx®, Sony® Charging Time 4 V45micro: 3 Hrs 4 V98micro: 5 Hrs 4 V150micro: 7 Hrs
4 Channel V-Mount Simultaneous charger
FEATURES
built in AC Adapter 165W DC
Powerbase Function
Weight: 1,9Kg
SPECIFICATIONSModel VS4-RL Mount V-Mount Channel 4 simultaneous Charging Current 16,8V / 2,5A DC Output 16,5V / 10,0A DC Port XLR 4 1minus 4plus AC in 90-264V / 47-63Hz Operating Temp. Range -10°C +35°C Weight 1,9Kg Dimensions (W x H x D) 145 x 225 x 270mm Warranty 2 Years Batteries bebob, Idx®, Sony®
8 Channel Vmicro Simultaneous Quick Charger
FEATURES
built-in AC Adapter 165W DC
Powerbase Function
Weight: 1,9Kg
SPECIFICATIONSModel VS8micro Mount Vmicro Channel 8 simultaneous Charging Current 16,8V / 1,25A DC Output 16,5V / 10,0A DC Port XLR 4 1minus 4plus AC in 90-264V / 47-63Hz Operating Temp. Range -10°C +35°C Weight 1,9Kg Dimensions (W x H x D) 145 x 225 x 270mm Warranty 2 Years Compatible with Vmicro batteries (8 pieces) VMount batteries (4 pieces) VCine batteries (4 pieces) Batteries bebob, Idx®, Sony® Charging Time 8 V45micro: 3 Hrs 8 V98micro: 5 Hrs 8 V150micro: 7 Hrs
Charges one BP-U90/U60/U60T/U30 batteryThe BC-U1A battery charger charges one compact BP-U90, BP-U60/U60T, BP-U30 Lithium-ion battery at high speed.
Built-in AC adaptor provides 12 V DC power outputThe BC-U1A also has 12 V DC power output cable to power a camcorder directly.
Compact design for ease of useThe BC-U1A has a mass of only 340 g (12 oz) and dimensions (W x H x D) of 128 x 45 x 98 mm (5 1/8 x 1 13/16 x 3 7/8 inches).
NOTE: BC-U1A is compliant with safety standard IEC62368-1.SPECIFICATIONS
Power Requirements: AC100V～240V 50/60Hz
Power consumption: 46W
DC supply: [36W] 12V / 3.0A
Charging Voltage: 16.4V
Dimensions (W x H x D): 128x45x98 (mm)
Mass: 340 (g)
Operating Temperature: [DC supply]-5 ℃～+45℃; [Charge] 0℃～+45℃
Charge times
BP-U90: 190 minutes
BP-U60: 150 minutes
BP-U30: 130 minutes
Charges two BP-U90/U60/U60T/U30 batteriesThe BC-U2A battery charger can simultaneously charge two compact BP-U90, BP-U60 / 60T or BP-U30 Lithium-ion batteries at high speed
Built-in AC adaptor provides 12 V DC power output while charging one batteryThe BC-U2A also has 12 V DC power output cable to power a camcorder directly, while charging one battery simultaneously.
Portable design for ease of useThe BC-U2A has a mass of 620 g (1 lb 6 oz) and dimensions (W x H x D) of 177 x 53.2 x 137 mm (7 x 8 1/8 x 5 1/2 inches).NOTE: BC-U2A is compliant with safety standard IEC62368-1.SPECIFICATIONS
Power Requirements: AC100V～240V 50/60Hz
Power consumption: 89W
DC supply: [36W] 12V / 3.0A
Charging Voltage: 16.4V
Dimensions (W x H x D): 177x53.2x137 (mm)
Mass: 620 (g) +DC out cable
Operating Temperature: [DC supply]-5 ℃～+45℃; [Charge] 0℃～+45℃
Charge times:
BP-U90: 190 minutes
BP-U60 / 60T: 150 minutes
BP-U30: 130 minutes
LC-D421 can charge 4 DV batteries simultaneously, with 2A charging current per channel. Users can exchange different types of battery plate to charge different types of DV batteries together.
FEATURES
4-ch simultaneous charging
2A charging current per channel
Snap-on exchangeable DV plates
Mixed types of DV batteries charging
U/F/D/B/C/I/V/E plates supported
4-LED charging indicators
PC-P430S can charge 4pcs V-mount camera batteries simultaneously. The charging output is DC16.8V, 3A each channel.
The PC-P430S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors: Display Red: Battery is charging, capacity below 80%; Display Yellow: Battery is charging, capacity above 80%; Display Green: Charging finished.
PC-P430S has 2x 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable (optional purchase), the PC-P430S can be used as AC-DC adaptor of 2-ch DC 15V, 6A, 90W simultaneous output. Please note the AC-DC adapting output will not work when battery is charging.
FEATURES
V-mount battery charger
4-ch simultaneous charging
3A per channel quick charging
2x 4-pin XLR DC output
LED charging indicators for each channel
The PC-U130B2 consists of an AC-DC power module and a dual heads D-tap DC cable to connect with the D-tap socket of batteries. So you can charge 2 batteries together. The charger offers DC 14-16.8V, 3A fast charging output in total.
The PC-U130B2 has an LED charging indicator. It’s red during charging, and turn to green when charging finished.
FEATURES
Ultra portable charger
Charge battery through D-tap socket
Provide 2 D-tap heads
3A fast charging current
LED charging indicator
S-3602U is a dual channel charger for SWIT S-8U65 S-8U95 and compatible with SONY BP-U series batteries.
S-3602U has 2 charging channels, totally DC 16.7V, 1.9A output, and can charge 2 batteries sequentially to 75% capacity, and then charge both batteries simultaneously to full.
The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging.
S-3602U has a 5.5mm/2.1mm pole socket of DC12V, 1.9A adapting output. The package also provides a DC cable for adapting SONY PMW-EX1/3/100/200 cameras.
FEATURES
Charger for SWIT S-8U65 S-8U95 DV battery
2-ch intelligent charging
Compatible with SONY BP-U series batteries
1 DC adapting output for SONY cameras
4-level LED charging indicators
S-3812S can charge 2 V-mount batteries simultaneously at Max 6A fast charging current, to SWIT particular batteries. The charging speed is quite faster than normal chargers.S-3812S has a LCD screen to display the real time. S-3812S has the 3-color LED indicators for both 2 channels.
FEATURES
2-ch simultaneous charging
Identify battery type and adjust charging method
6A fast charging for SWIT particular batteries
3A charging for normal batteries
Support AC to 4-pin XLR output
Support battery to 4-pin XLR output
LCD display charging/adapting info
The portable charger S-3822S can charge 2 V-mount batteries simultaneously. S-3822S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. S-3822S has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable, the S-3822S can be used as AC-DC adaptor of DC 14.4V, 5A, 72W output.
FEATURES
Charging V-mount batteries
2-ch simultaneous charging
3A charging current per channel
LED charging indicators
Support AC to 4-pin XLR output
Light weight and portable
The UPS – Intelligent Li-Ion V-Mount battery provides your equipment with continuous power, as it acts as a V-Mount battery, on which you also can put another battery on. So you can “hot-swap” on any equipment without risking it to loose power. First the attached battery is used and then if it reaches a critical point – power switches back to the Intelligent Battery instantly.The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a maximum loss in sub zero temperatures of half the capacity.There is also a 5-Level power indicator. The first level lights up as the back battery replacement light at the same time.Specifications
Capacity: 6.6Ah 100Wh
Voltage: 14.8V
Current: 10A (max.)
D-Tap In- / Output: Yes (1x)
USB-A Output: 5V/2A
DC 2.1 Pin Out-/ Input: 10.0-16.8V
Dimensions: 152(L)mm×100(W)mm×63(H)mm
Weight: 850g
In the box
1 × BP-F100U - 100Wh Intelligent Battery
