Clear lens with the Prodigy Air Deflector The Prodigy Air Deflector is the perfect solution for keeping a clear lens. At Glastonbury Festival, where it was raining, we noticed the camera operators continually wiping water off the lens. Rain deflectors have been employing spinning discs and centrifugal forces for decades and have several disadvantages. The underlying principles haven’t changed in almost 30 years. We knew there had to be a better solution. With a simple push of a button, the patented design can be quickly deployed to provide you with the clear shot you need in any condition. Harnessing the Power of AirBefore it’s compressed and accelerated at 300+ mph, air is filtered to 1 micron and passes through the hose to the Air Head. The air attaches to the specially treated piece of glass, deflecting any water or particles that might otherwise ruin the shot. The pressurised air provides a barrier over the entire frame with no dead zones where water might accumulate. The Prodigy is quieter and produces sound at a lower frequency than traditional rain spinners, resulting in less discomfort for the talent, crew and environment. The downward force imitates gravity and the natural movement of rainfall.No Spinning GlassWith no need for a spinning piece of glass, we eliminate many limitations in traditional designs. The Prodigy has no centrifugal forces at play so there’s no gyroscopic effect for the operators to manage. This makes it a much easier experience for the operator whether it’s panning on a tripod or operating in handheld. The glass in the Prodigy is secured in place dissipating any vibrations, making it stronger and less likely to break from impacts.Optically Clear, Impact Resistant and SuperhydrophobicThe special piece of glass goes through a number of advanced manufacturing processes. The end result is a glass that’s optically clear with no effect on image quality or exposure,and has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a superhydrophobic coating.More Creativity and Fewer RetakeWith an airspeed of over 300 mph, the lens is cleaned almost immediately, with some particles not even coming into contact with the glass, making it ideal for high-speed work. The compressor has three different speeds so you can choose the one that best matches your desired look and feel.Saves Time On SetThe Air Head doesn’t emit any heat, so there’s no fogging on the lens or filters. This also saves time because you don’t have to unbag the camera and lens to clear the lens before shooting.Plastic bagging is easily secured to waterproof the camera and other electronics because of the flat sides.Rental Friendly & Easy MaintenanceCompared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed of carbon fiber, high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates. It won’t rust or corrode. When you need to replace your glass, it’s simple and quick to do so. Spare glass is accessible if it gets damaged or breaks. This results in a faster ROI for rental investments and the lower cost makes it more accessible to end-users, works with existing accessories, requiring less inventory space to store.Industry Standard 24V PowerThe Prodigy is powered by 24V, which has already become an industry standard used to power cameras and light fixtures. This increases efficiency and allows for the use of larger batteries with longer run times. An industry-standard 2-pin LEMO input with built-in automatic polarity switching prevents any chance of shorting out and damaging the compressor when using different cable standards.Built on the Misfit KickThe Air Head can also be used as a standalone matte box and builds on the foundation set by the Misfit Kick. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clip-on configuration or with rod supports on a 15mm LWS or 15/19 Studio setup. The top flag is made of carbon fiber, which aids with flare control and adds further protection from the weather.Built for RiggingThe Compressor has a variety of rigging possibilities, featuring helicoil reinforced threads to connect clamps and brackets. When it comes to high-risk stunts, the priority is always safety. For added security, attach a safety line using the tether points on the Air Head and Compressor. The Compressor can be positioned anywhere on the rig using the 50cm (20”) long hose. The bayonet quick-release connectors ensure a leak-free connection.Run/Stop ConnectivityAn industry-standard 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.Field-Tested by ProfessionalsThe Prodigy is already in use on feature films and projects like Matt Reeves’ The Batman, shot by DP Greig Fraser ACS, ASC and many more.User-Friendly Control PanelThe buttons on the compressor’s control panel are big and well-lit, making them easy to operate even with gloves on. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. Future firmware updates may be completed by the user without requiring the unit to be sent in using the Type-C USB connection.   Product Highlights Easily deflects rain and other debris for a clear lens 50cm (20") long hose allows for flexible compressor placement Rugged and tough construction for use in any weather conditions Reveal Stage expands for a third filter stage Requires Frame Safe clamp adapter - available in 11 sizes In the box B5000.1001 - Prodigy Air Deflector Compressor B5000.1002 - Prodigy Air Head B5000.1004 - Prodigy Power Cable B5000.1007 - Prodigy Hose B5000.1009 - Prodigy Top Flag 2x B1251.1042 - 4x5.65"/4x4" Filter Tray (Misfit Kick)  

The Prodigy Air Deflector Compressor filters and compresses air, accelerating it to 300+ mph through the connected hose to the Air Head. It is extremely durable, rugged, and waterproof, and can endure any harsh conditions in either hot or cold climates. BUILT FOR PROFESSIONALS The Compressor can be placed up to 50cm (20") away from the Air Head and has a variety of rigging possibilities. When in high risk situations, connect a safety wire to the tether point for added peace of mind. Powered by industry-standard 24V for high efficiency and ability to use larger batteries for longer run times. The 2-pin LEMO port has built-in automatic polarity switching to prevent any short circuits and potential damage. The 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes. USER-FRIENDLY The large buttons on the control panel are easy to operate with gloves on, and future firmware updates can be done by the user using the Type-C USB port. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. The air filter is a drop-in replacement with no special tools required that can be done in the field. EXTRA CARE COMES STANDARD Hand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Compressor comes with our famous Bright Tangerine Support and the addition of a 24-month warranty   Product Highlights Easy to rig using arms, rod brackets and clamps Simple interface for operation with R/S connectivity Automatic Polarity Detection (2-pin LEMO for US or ARRI Standard) Rugged housing and military-grade filtration Self-serviceable in the field or on location

Clear lens with the Prodigy Air Deflector The Prodigy Air Deflector is the perfect solution for keeping a clear lens. At Glastonbury Festival, where it was raining, we noticed the camera operators continually wiping water off the lens. Rain deflectors have been employing spinning discs and centrifugal forces for decades and have several disadvantages. The underlying principles haven’t changed in almost 30 years. We knew there had to be a better solution. With a simple push of a button, the patented design can be quickly deployed to provide you with the clear shot you need in any condition. Harnessing the Power of AirBefore it’s compressed and accelerated at 300+ mph, air is filtered to 1 micron and passes through the hose to the Air Head. The air attaches to the specially treated piece of glass, deflecting any water or particles that might otherwise ruin the shot. The pressurised air provides a barrier over the entire frame with no dead zones where water might accumulate. The Prodigy is quieter and produces sound at a lower frequency than traditional rain spinners, resulting in less discomfort for the talent, crew and environment. The downward force imitates gravity and the natural movement of rainfall.No Spinning GlassWith no need for a spinning piece of glass, we eliminate many limitations in traditional designs. The Prodigy has no centrifugal forces at play so there’s no gyroscopic effect for the operators to manage. This makes it a much easier experience for the operator whether it’s panning on a tripod or operating in handheld. The glass in the Prodigy is secured in place dissipating any vibrations, making it stronger and less likely to break from impacts.Optically Clear, Impact Resistant and SuperhydrophobicThe special piece of glass goes through a number of advanced manufacturing processes. The end result is a glass that’s optically clear with no effect on image quality or exposure,and has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a superhydrophobic coating.More Creativity and Fewer RetakeWith an airspeed of over 300 mph, the lens is cleaned almost immediately, with some particles not even coming into contact with the glass, making it ideal for high-speed work. The compressor has three different speeds so you can choose the one that best matches your desired look and feel.Saves Time On SetThe Air Head doesn’t emit any heat, so there’s no fogging on the lens or filters. This also saves time because you don’t have to unbag the camera and lens to clear the lens before shooting.Plastic bagging is easily secured to waterproof the camera and other electronics because of the flat sides.Rental Friendly & Easy MaintenanceCompared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed of carbon fiber, high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates. It won’t rust or corrode. When you need to replace your glass, it’s simple and quick to do so. Spare glass is accessible if it gets damaged or breaks. This results in a faster ROI for rental investments and the lower cost makes it more accessible to end-users, works with existing accessories, requiring less inventory space to store.Industry Standard 24V PowerThe Prodigy is powered by 24V, which has already become an industry standard used to power cameras and light fixtures. This increases efficiency and allows for the use of larger batteries with longer run times. An industry-standard 2-pin LEMO input with built-in automatic polarity switching prevents any chance of shorting out and damaging the compressor when using different cable standards.Built on the Misfit KickThe Air Head can also be used as a standalone matte box and builds on the foundation set by the Misfit Kick. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clip-on configuration or with rod supports on a 15mm LWS or 15/19 Studio setup. The top flag is made of carbon fiber, which aids with flare control and adds further protection from the weather.Built for RiggingThe Compressor has a variety of rigging possibilities, featuring helicoil reinforced threads to connect clamps and brackets. When it comes to high-risk stunts, the priority is always safety. For added security, attach a safety line using the tether points on the Air Head and Compressor. The Compressor can be positioned anywhere on the rig using the 50cm (20”) long hose. The bayonet quick-release connectors ensure a leak-free connection.Run/Stop ConnectivityAn industry-standard 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.Field-Tested by ProfessionalsThe Prodigy is already in use on feature films and projects like Matt Reeves’ The Batman, shot by DP Greig Fraser ACS, ASC and many more.User-Friendly Control PanelThe buttons on the compressor’s control panel are big and well-lit, making them easy to operate even with gloves on. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. Future firmware updates may be completed by the user without requiring the unit to be sent in using the Type-C USB connection.   Product Highlights Easily deflects rain and other debris for a clear lens 50cm (20") long hose allows for flexible compressor placement Rugged and tough construction for use in any weather conditions Includes all necessary cables, accessories and spares Set up for three stages, with 15mm LWS support using Black Hole In the box B5000.1001 - Prodigy Air Deflector Compressor B5000.1002 - Prodigy Air Head 2x B5000.1004 - Prodigy Power Cable 2x B5000.1007 - Prodigy Hose B5000.1009 - Prodigy Top Flag 3x B1251.1042 - 4x5.65"/4x4" Filter Tray (Misfit Kick) B5000.1006 - Prodigy Spare Glass B1235.1017 - Frame Safe Clamp Adapter (143mm) B1250.1076 - Black Hole Rubber Donut (143mm) B1235.1002 - 15mm LWS Support Bracket (Misfit Kick)  

The Prodigy Air Head takes pressurised air from the Compressor through the connected hose and creates barrier over a  specially treated piece of glass for a clear lens. With advanced processes, we can make a glass that is optically clear with no effect on image quality or exposure, and it has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a  superhydrophobic coating. Spare glass is accessible if it gets damaged or breaks, and replacing it takes only a few minutes.BUILT ON THE MISFIT KICKThe Air Head can also be used as a standalone matte box. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clipon configuration or with rod supports on a 15mm LWS or 15/19 Studio setup.Compared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed from high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates.EXTRA CARE COMES STANDARDHand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Air Head comes with our famous Bright Tangerine Support and the addition of a 24-month warranty.   Product Highlights Keep your lens clear to shoot through rain, dust and debris Low maintenance with no moving parts Flat surfaces make it easy to bag your camera No vignetting with wide angle lenses on large format sensors Can be set up for clip-on or rod mounted with full range of Frame Safe clamp adapters  

The Prodigy accelerates air to over 300 miles per hour. The high airflow filter purifies to 1 micron blocking out dust particles and debris from entering the compressor.It is robust, waterproof, and designed to operate in a wide temperature range (-40 to +50°C) so you can use the Prodigy in any type of environment.EASY INSTALLATIONThe filter in the Prodigy Compressor needs to be replaced every 12 months or sooner, so that you can maintain the highest possible level of performance. To replace it is simple: remove four mounting screws on the bottom and remove the housing. Remove the old filter and drop in the new filter. Reattach the housing and you’re ready to go.Product Highlights Prevents particles from entering the compressor Military-grade filtration designed for high airflow Filters out any particle larger than 1 micron Waterproof and operates in a wide temperature range  

Bright Tangerine Prodigy Hose – 100cm (40″) A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.The hose is 100cm (40”) in length and features secure bayonet fittings on each end. Purpose-built to handle high pressure and large volume of air 100cm (40”) long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks Hose also available in 50cm (20”) & 75cm (30”) lengths Description Available in 50cm (20”), 75cm (30”) & 100cm (40”) lengths to place the compressor further away from the Air Head. QUICK RELEASE CONNECTORS Attaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow. DESIGNED FOR HIGH PRESSURE The Prodigy Hose is available in a range of lengths, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow. Additional information Weight: 0,120 kgDimensions: 102,5 × 4 × 3 cm      

Bright Tangerine Prodigy Hose – 75cm (30″) A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.The hose is 75cm (30”) in length and features secure bayonet fittings on each end. Purpose-built to handle high pressure and large volume of air 75cm (30”) long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks Hose also available in 50cm (20”) & 100cm (40”) lengths Description Available in 50cm (20”), 75cm (30”) & 100cm (40”) lengths to place the compressor further away from the Air Head. QUICK RELEASE CONNECTORS Attaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow. DESIGNED FOR HIGH PRESSURE The Prodigy Hose is available in a range of lengths, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow. Additional information Weight 0,090 kgDimensions 75,5 × 4 × 3 cm        

A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.QUICK RELEASE CONNECTORSAttaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow.DESIGNED FOR HIGH PRESSUREThe Prodigy Hose is 50cm (20") in length, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow.Product Highlights Purpose-built to handle high pressure and large volume of air 50cm (20") long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks  

Power the Prodigy Air Deflector with this 2-pin Lemo to 3-pin XLR cable.24V RATEDThe 1.5m (4.9ft) cable made from high-quality materials rated for 24V offers minimal voltage drop. They are flexible and reliable for the most demanding conditions.WIRING SPECIFICATIONSThe Prodigy power cable uses the US standard. For both the 2-pin LEMO & XLR connector, Pin 1 is wired for Power (+), and Pin 2 for Ground (-). EXTRA CARE COMES STANDARDHand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Power Cable comes with our famous Bright Tangerine Support and the addition of a 12-month warranty.   Product Highlights Hand-built and tested for a reliable connection for the Prodigy Air Deflector High-quality 2-Pin 2B Lemo & XLR connectors Rated for 24V output with low voltage drop Flexible 1.5m (4.9ft) long cable    

The Prodigy Glass has been through a nummer of manufacturing processes to create a piece of glass with special properties.The air flow from the compressor attaches to the glass to deflect water and particles out of view.IMPACT-RESISTANTThe Prodigy Glass is neutral and impact resistant, free of unwanted color shifts while protecting expensive front elements and filters. It provides a barrier for any debris or particles which would otherwise damage the lens during stunts or action scenes.WATER REPELLANTThe glass has also been treated with a superhydrophobic coating that prevents water from beading on the surface. Combined with the Prodigy air flow, any water is cleared almost instantly.EASY INSTALLATIONThe replacement of the glass is a simple process that can be done in minutes. Using a 4mm Hex key, undo the screw to remove the access panel. Slide out the old glass and insert the new glass. Reattach the access panel and fixing screw and you’re ready to go.Product Highlights Impact-resistant against chips and scratches Superhydrophobic coating to repel water and particles Optically clear to maintain lens characteristics Easy to replace and install in a few minutes  

The Prodigy Top Flag is a great way to protect your frame from the elements and maintain contrast by blocking out flares.  No tools are required, so you can install it quickly on the go. The flag provides additional protection for your Prodigy glass, with its 165 degree range of movement. It can close flush  for transport and open up to block out flares and provide coverage from rain.QUICK AND EASYTo install the flag, line up the guide posts and insert the thumbscrew through the mounting point. You can now use the thumbscrew to set the tension. When fully tightened, the flag will be secured in position. Slightly loosen to adjust the flag on the fly. This is great when working in fast paced environments when constantly changing angles.EXTRA CARE COMES STANDARDMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Prodigy Top Flag comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.Product Highlights Quick and easy installation, no tools required Adjustable tension - lock it off or adjust it on the fly Lightweight carbon fiber construction for easy transport Closes flat for complete protection for your Prodigy Glass  

Discover Flop Daddy™. This game-changing innovation instantly transforms any 4x4 floppy into a relaxing glare-free screening room, so you can focus on what really matters.Featuring a white outer layer to reflect the heat and a black interior to minimise monitor glare. Flop Daddy is ideal for everyone as: DOP/DP Camera Operator AC Director/AD Script DIT VAO Lighting Grip Make-up Wardrobe FX Stylist Agency Stunts ...   FEATURES Slips on to any 4x4 floppy Waterproof material 2 roll up sides with mesh window inner layer Travels in a sleek shoulder bag White outside - black inside - dual layer Nylon. Grab some Sand Noodles™ to slide into the sides of your Flop Daddy™ (or KUPO Floopy) if the wind picks up.    

  Inovativ Insight Carrying CaseThis case is for carrying all components of the Insight Mounting System if you need to install it on location. Product Weight: 20 lbs Dimensions: 50 In. L x 16 In. W x 11 In. H    

Much more than just a monitor Bag!The OR-140 Hard Shell Monitor Bag was designed to carry transport and protect most of the 5″ field productions LCD monitors, which are available on the market.The special design of the OR-140 enables any user to operate the monitor right from the bag and offers all the needed features such as an integrated hood, table mounting option and on-camera mounting option via 1/4″ cold shoe. The all in one ORCA bags monitor solution is a unique development that offers a full solution for your field monitor. The Thermoforming technology structure of the OR-140 ensures full protection of LCD monitors on the field. Dimensions: Internal:cm/inchLength: 18cm / 7"Width: 12,5cm / 5"Height: 9cm / 3.5"External:cm/inchLength: 20cm / 8"Width: 15cm / 6"Height: 10cm / 4"  

The OR-142 Hard Shell Monitor Bag was designed to carry, transport and protect most of the 7″ field productionsLCD monitors, which are on the market.The special design of the OR-140 enables any user to operate the monitor right from the bag and offers all the needed features such as an integrated hood, table mounting option and on-camera mounting option via 1/4″ cold shoe.The all in one ORCA bags monitor solution is a unique development that offers a full solution for your field monitor. The Thermoforming technology structure of the OR-140 ensures full protection of LCD monitors on the field. Dimensions: Internal:cm/inchLength: 23cm / 9"Width: 18cm / 7"Height: 12 cm / 5"External:cm/inchLength: 25cm / 10"Width: 22cm / 8.5"Height: 15 cm / 6"

Soft but well padded and durable bag for use with tripod or light stands with maximum length 105cm / 40".Depending on the size the soft bag can carry up to approx. 3 - 6 light stands.The OR-732 is made from high-quality material and strong YKK zippers. The bottom of the bag has an extra protection layer to reduce wear and tear.Inside the bag, two velcro straps and a tripod head mark helps to secure the tripod in place. The bag has an external zip pocket for tripod and camera plates, comes with a shoulder strap and can be carried by two well balanced handles with extra padding. Dimensions: Internal:cm/inchLength: 105cm / 40"Width: 23cm / 9"Height: 23cm / 9"External:cm/inchLength: 107cm / 41"Width: 25cm / 10"Height: 25cm / 10"

The ORCA OR-106 Rain Cover for shoulder-mount ENG camcorders protect your camcorder from inclement weather conditions. The cover is made from thermoplastic polyurethane, a transparent material that allows for easy viewing, and features an inflatable skeleton system for better support and use. The cover can be slipped onto the camera and has room for your hand to go underneath it for holding and adjusting the camera. Strategically placed openings for the lens, microphone, and viewfinder ensure that your video quality will not be impacted. FEATURES Protects video camera from rain, dust, and other elements  Easy to slip onto a camera  Inflatable skeleton system allows for better support and use  Made from transparent material (TPU) for easy viewing     

The rectangular cover protects your camera equipment during the break in filming or after show hours at the exhibition stand or outdoors. FEATURES Made of waterproof nylon material Easy to put on Locking at the bottom side wiht eyelets and rope Dimensions: Length: 100cmWidth: 40cmHeight: 80cmWeight: 0,5kg  

The OR-111 Small Production Umbrella is ideal for protecting your camera from rain or shine. The OR-111 Small Production Umbrella is made from high quality materials, including a UV waterproof canopy, fiberglass rods and special 1/4" female thread that can be mounted to Cold Shoe mount with 1/4" male screw. FEATURES UV and waterproof material Flexible and durable fiberglass rods 1/4" female tread Compact and lightweight 20" diameter  

Help to protect your gear from rain or sunshine with the XL Outdoor Production Umbrella from Orca. The umbrella features an aluminum handle with a 3/8" female thread for attaching it to a tripod, stand, or other gear. Photographers will appreciate the large diameter 130cm / 51.2" and strong fiberglass spokes.

The Orca OR-117 is a specialized magnetic boompole holder designed for sound professionals working in the field. It allows for quick attachment and detachment of the boompole from a harness or stand, improving workflow efficiency. The OR-117 features a durable, lightweight design with soft neoprene padding to prevent friction. Its innovative magnetic mechanism ensures a secure hold, enabling hands-free operation for sound operators. Product Features: This boompole holder is perfect for professionals needing quick, reliable access during audio capture. Magnetic Mechanism: Ensures quick attachment and secure holding. Soft Neoprene Padding: Protects the boompole from wear and tear. Hands-Free Operation: Ideal for professional sound operators in demanding environments. Lightweight Design: Easy to transport and use in various field conditions. Dimensions & Weight: Weight: 0.12 kg (0.26 lbs)

The OR-128 is a rectangular and universal accessory case to carry and protect many types of sensitive equipment: lenses, recording devices, chargers, batteries, small lights, small cameras, matte boxes, and small monitors. FEATURES Internal mesh pockets Back external connection for a trolley bag 5 removable internal dividers External side pocket for key, pans, etc Padded shoulder strap and carrying handle Business card holder Internal Dimensions: Length: 50cm Width: 22cm Height: 20cm External Dimensions: Length: 57cm Width: 27cm Height: 23cm Weight 1,5kg  

The Orca Audio Mixer Bag OR-330 is compatible for Zaxcom NOVA, Sound Device 833, 888 & 633 or similar sized mixers.It´s thoughtfully desinged with an external aluminum frame and internal honeycomb frame for maximum gear protection and 6-direction equipment access. FEATURES Inside lining made from bright blue brushed polyester for easy equipment viewing Unique battery pocket with extra space Detachable front pocket for up to 6 wireless receivers 2 detachable external pouches and 3 internal rubber bands to hold a wireless receiver 2 detachable carrying handles and padded shoulder strap 2 extra padded sponges to position wireless receivers inside the bag Orca "lifts" that can be used to adjust mixer height within the bag Transparent TPU top cover for easy equipment viewing Optically available flat covers* in 3 different colors: black, blue and grey can be combined with OR-330 and replaces the big original front pouch.(*OSP-1030-20/21/22 sold separately) Internal Dimensions: Length: 27cm Width: 13cm Height: 19cm External Dimensions: Length: 33cm Width: 27cm Height: 24cm Weight 2,2kg  

OR-504 is recommended for transporting and protecting cameras like: Sony ALPHA DSLR (all models), HXR-NX80, HXR-NX100, Canon XA & XF (all models), Panasonic HC-X2000, AG-CX350, AG-AC30, JVC GY-HM170 4K and similarly sized camera models. Orca´s new Classic Line Bags are expertly designed to carry and protect your video camera and all related items, from studio to location and anywhere else you choose to shoot.The bags are well-protected with layers of foam and EVA. They are also extremely light, versatile, and easy to carry. They come with three external pockets, a padded shoulder strap, and a flexible internal dividing system that can be configured according to the user´s needs. FEATURES Bright blue brushed polyester interior for easy equipment viewing Wide top opening for easy equipment viewing and operation Flexible internal dividing system that can be configured according to user´s needs 3 large external pockets Padded shoulder strap for comfortable transport Internal Dimensions: Length: 39cm Width: 17cm Height: 21cm External Dimensions: Length: 50cm Width: 28cm Height: 27cm Weight 1,4kg