Topseller

Sony VENICE CineAlta 6K FullFrame camera
Next generation camera with forward thinking full frame sensor, phenomenal color science and user-friendly operation Simple and intuitive Usability and reliability of the camera is one of the major concerns for operators, especially in tough or time-critical filming conditions. With a user-friendly design, clear and simple menu navigation, and a highly durable, reliable construction, VENICE lets you simply concentrate on filming, and not the camera.   Full-Frame sensor for cinema VENICE features an all-new Full-Frame sensor with the classic 36 x 24-mm dimensions that have been a staple of photography for over 100 years. Designed exclusively for high-end cinematography, this sensor can capture images up to a maximum resolution of 6048 x 4032. Switchable imager modes mean VENICE can support an unprecedented number of cinematic aspect ratios for complete creative freedom:   Full width 36 mm 6K In full-frame, you can use the full 6048 pixel width of the sensor for 6K imager modes such as 3:2, 2.39:1*, 1.85:1, 17:9, and 16.9*. Equivalent to 4-perforation motion picture film, these 6K modes allow for extra-shallow depth of field, super-wide shooting, and other creative effects.   Super35 anamorphic 4K For super-wide screen productions, VENICE offers two full-height 2x squeeze anamorphic imager modes that include 6:5 and 4:3 recording modes for 12:5 (known as 2.39:1) and 8:3 (2.66:1) scenes, respectively. Explore how VENICE can meet your production requirements with the firmware and licensing requirements in the aspect ratio chart: Fast shutter VENICE’s high-speed readout sensor minimizes the jello effect typical in CMOS sensors.   Phenomenal latitude VENICE has an exceptional 15+ stops of latitude, with low noise for extraordinary performance in delivering phenomenal images in conditions from searing sunlight to almost no light. VENICE’s real-world performance also excels at High Dynamic Range imaging and allows unprecedented creative freedom in grading.   More colors for more expression VENICE can exceed Rec. 2020 color space. This means the color range is wider than DCI-P3 and can beautifully reproduce the true color of the scene in front of your lens. This also provides the broad palette in the grading suite using the established workflow of Sony’s third-generation LOG gamma encoding (S-Log3) and ultra-wide color space.   More colors for more expression VENICE can exceed Rec. 2020 color space. This means the color range is wider than DCI-P3 and can beautifully reproduce the true color of the scene in front of your lens. This also provides the broad palette in the grading suite using the established workflow of Sony’s third-generation LOG gamma encoding (S-Log3) and ultra-wide color space.   Dual Base ISO VENICE has a base ISO of 500 to provide the optimal dynamic range for typical cinematography applications with on-set lighting. A secondary High Base ISO of 2500 excels in low-light High Dynamic Range capture, with an exposure latitude from 6 stops over to 9 stops under 18% Middle Gray, for a total of 15 stops. High Base ISO 2500 is ideal whenever you’re using slow lenses or shooting dimly-lit environments. Combining ISO2500 with VENICE’s internal eight-step Optical ND filter system offers the ability to emulate different ISOs while maintaining maximum latitude of +6 and -9 stops, enabling you to use VENICE as an ISO1250 camera.     World’s first 8-step mechanical ND Filters VENICE is the world’s first camera of its class with a servo-controlled 8-step mechanical ND filter mechanism built into the camera chassis. It offers a massive ND of 0.3 (1/2 = 1 stop) to ND2.4 (1/256 = 8 stops) range that reduces time lost on set changing external filters. The ND filters also greatly increase VENICE’s flexibility when being controlled remotely on drones and cranes, or in an underwater housing.     Next generation viewfinder The DVF-EL200 was created as the perfect partner for VENICE. A 1920 x 1080 OLED panel enables precise, high-resolution focusing and framing, including False Color Display at the touch of a button. A rotary encoder provides instant access to brightness, peaking and contrast. An all-new ergonomic design allows for tool-free attachment/detachment and reconfiguring within seconds. The industry-standard LEMO connector offers exceptional durability.    Engineered to survive VENICE’s chassis is engineered to be amazingly robust and has been rigorously tested in the harshest conditions. Its ventilation system is completely isolated from all electronic components to prevent ingress of dust, sand and splash. The silent-running fan can be cleaned or even swapped out on set quickly and easily.   Easily configurable VENICE has a fully modular design and even the sensor block is interchangeable. So, as sensor technology advances in far future, you have the opportunity to upgrade without investing in a new camera. In order to maintain ergonomic balance for operators, the top handle and viewfinder are easily adjustable. As the height of the camera from the bottom to the optical center of the lens mount is the same as the F55, base plates and other accessories used for the F55 can be used with VENICE. The AXS-R7 recorder can be attached to VENICE with just four screws.   Additional features of the Venice camera: native PL- and E-mount (Lever lock type) anamorphic aspect ratios of 4:3 and 6:5 at 4K for shooting both 2.4:1 and 2.66:1 widescreen desqeeze function on monitor out for several anamorphic squeeze factors up to 16bit of tonal range when recording in RAW or X-OCN (16-bit eXtended tonal range Original Camera Negative) file formats downsampling from Full Frame Image with 6K resulution to 4K XAVC codec parallel recording of Proxy Files or XAVC on SxS cards while recording 6K (RAW or X-OCN) on AXS cards the Select FPS function lets you choose frame rates from 1 frame per second to as high as 120 fps, depending on imager mode.  *Note: higher Framerates than 60fps require the HFR License available from summer 2019 several control tools for checking aperture an focus such as: up to 4.0x Dot-by-Dot magnification of the viewfinder image, Surround View (Look Around), High/Low Key, USER 3D LUTs, ACES compatibility Full menu control via web browser based wired and wireless connection and much more...  More information about the Sony VENICE can be found at www.sonycine.com  Download Technicolor Look Collection for VENICE here.

€1.00*
Raptor T2.9 100mm Lens
  IB/E Optics Raptor T2.9 100mm Cine Macro Lens - UMS PL Mount The RAPTOR lenses featuring full frame (24×36) coverage and beyond, 1:1 magnification, T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Aperture T 2.9-T22 Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E,...) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY    

€1.00*
Raptor T2.9 60mm Lens
  IB/E Optics Raptor T2.9 60mm APO Cine Macro VV Lens - UMS PL Mount All RAPTOR lenses featuring full frame (24x36) coverage and beyond, 1:1 magnification, max T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E, …) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY  

€1.00*
Raptor T2.9 150mm Lens
  IB/E Optics Raptor T2.9 150mm Cine Macro Lens - UMS PL Mount The RAPTOR lenses featuring full frame (24×36) coverage and beyond, 1:1 magnification, T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Aperture T 2.9-T22 Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E,...) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY    

€1.00*
Leitz 35mm M 0.8 Leitz f/1.4
The M full frame lenses have captured unique, iconic images for over than 60 years around the world. To bring the characteristics of these lenses directly to the cinema world, Leitz Cine Wetzlar designed the new M 0.8 lenses. The complete set contains focals of 21mm, 24mm, 28mm, 35mm, 50mm, 50-N, 75mm and 90mm. The M 0.8 lenses interpret light and skin tones with a unique sense of clarity, color and charisma. FEATURES Focal Length:        35 mm Max. Aperture:     f/1.4 Format:                  Full Frame (24mm x 36mm) Mount:                   Leica M-Mount Front Diameter:    80mm Weight:                   380g CAMERA COMPATIBILITY Sony VENICE ARRI Alexa Mini/Amira RED Monstro and more - see comparative table:  

€1.00*
Monitors & Wireless Transmission
Filter
*DIscontinued* SmallHD 503 5" Ultra-Bright Full-HD Field Monitor with HD-SDI/HDMI and 2200Nits
 *This product is EOL - End of Life* PageBuilder OSPageBuilder OS: Quick and easy way to access professional software tools like Focus Peaking, HD Waveform, and 3D LUTs. HDR Preview and 3D LUT SupportUltraBright monitors feature HDR Preview with 10-Bit ColorEngine and up to 2500 nits. Fine tune your HDR Preview with white point and black point adjustment sliders. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine. Efficiently UltraBrightThe 503 and 703 UltraBright are the Brightest 5" and 7" monitors in the world while maintaining low power consumption. In addition to LEMO power, Gold Mount, V-Mount and Sony L-Series battery plates are available. Software That Eliminates HardwarePagebuilder OS enables you to send your video signal downstream via the Output Preview page. Any LUTs applied to the Output Preview page will also be mirrored downstream. Easily convert HDMI/SDI signals with Cross Conversion . HD Scopes with Pixel Accurate Data AnalysisDisplay up to three, fully customizable Scopes on screen at a time. Utilize Color Picker to show raw pixel values from the displayed video. Expose with ConfidenceExposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras. Dual ViewMonitor two input sources simultaneously. You can apply LUT’s and tools to each source individually. Great for monitoring A/B cameras or pre and post LUT footage. You can also apply tools to each page individually. Custom Focus Assist & Peaking ToolsFocus assist creates a bright highlight on in-focus subject matter; highly recommended when focusing on the fly. Focus Peaking increases the image sharpness allowing more detailed focusing. Change your color and intensity of your focus tools. Versatile Image FramingSelect standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable). FEATURES 5",1920x1080 2x Function Buttons + Back Button + Joystick Brightness: 2200 nits Power via Battey Plates or 12V 2pin Lemo connector Rugged milled aluminum housing + Gorilla Glass HDMI and HD-SDI Cross Conversion HDR Preview and 3D LUT support TECHNICAL SPECS Display: IPS LCD Size: 5" Resolution: 1920x1080, 443 PPI Brightness: 2200 Nits Inputs: 2x 3G-SDI (1x output can be switched to input), 1x HDMI, Micro USB Output: 1x 3G-SDI, 1x HDMI, Headphone OS3 Software Suits (Waveform, Scopes, Focus, Peaking, 3D LUTs and more) Power input: via 2pin LEMO 12V connector or Battery Plate (Sony L-Series, V-Mount or Gold Mount) Sony L-, V-Mount or Gold Mount Battery Brackets available Bunch of usefull accessories available such as battery brackets, power cables, sunhood and mounting cage, monitor handles, screen protectors,...    

€1.00*
*Discontinued* SmallHD 702-OLED 7.7" 1280x800 OLED Monitor with Wide Color Gamut, HD-SDI/HDMI and 30
*This product is EOL - End of Life* PageBuilder OSAll SmallHD on-camera monitors are equipped with the powerful and easy-to-use PageBuilder operating system. Wide Color GamutEach 702 OLED monitor comes from SmallHD precalibrated. Easily install your own 3D LUT calibration with advanced color management solutions like Light Illusion's, LightSpace CMS, or SpectraCal's CalMAN. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine. Software That Eliminates HardwarePagebuilder OS enables you to send your video signal downstream via the Output Preview page. Easily convert HDMI/SDI signals with Cross Conversion. HD Waveform and ScopesDisplay up to three, fully customizable Scopes on screen at a time with highly detailed data analysis. Expose with ConfidenceExposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras. Versatile Image FramingSelect standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable).   FEATURES 7", 1920x1080 5x Function Buttons + Back Button + Joystick Brightness: 300nits HDMI and HD-SDI Cross Conversion Rugged milled aluminum housing + Gorilla Glass 3x Mounting points Stunning OLED color, HD waveform and scopes, 3D LUT support,... TECHNICAL SPECS Display: OLED Size: 7.7" Resolution: 128x800, 191 PPI Brightness: 2200 Nits Color Gamut: 100% Rec 709, 85% NTSC Color Depth: 8-bit Display (10-bit processing) Inputs: 1x 3G-SDI, 1x HDMI, Micro USB Output: 1x 3G-SDI, 1x HDMI, Headphone Jack OS3 Software Suits (Waveform, Scopes, Focus, Peaking, 3D LUTs and more) Power input: Sony L style switch battery plate V-Mount or Gold Mount Battery Brackets Kits available Bunch of usefull accessories available such as power cables, battery bracket kits, sunhood, monitor handles, screen protectors, cable lock,...    

€1.00*
*Discontinued* SmallHD Focus OLED HDMI Monitor Cine Kit
*This product is EOL - End of Life* 5.5-inch 1080p OLED with Wide Color Gamut + Tilt ArmProfessional grade camera-top monitor that can power your DSLR or mirrorless camera. (With Tilt Arm) Beautiful OLED in a convenient form factor.The FOCUS OLED is a very sharp, wide color gamut, touchscreen monitor that’s easy attach to a camera or rig. Shipping with every FOCUS OLED is the SmallHD Tilt Arm: a lightweight, camera-top mounting solution. Simple, convenient power.The FOCUS OLED monitor has an integrated Sony L Series battery plate and the unique ability to power popular DSLR and mirrorless cameras. Using the monitor’s 7.2 volt power output and camera specific adapter cables, operators can use one battery to power their camera and monitor for several hours. Powerful tools at your fingertips.Beyond the impressive hardware features of the FOCUS, is SmallHD OS3: a professional software toolset with an easy to manage, touchscreen interface. High resolution Scopes, Waveform, False Color, Focus Peaking, and real-time 3D LUTs are just some of the tools you can easily customize and access quickly.  

€1.00*
*Discontinued* SmallHD Focus OLED Sony NPFZ100 Bundle International
*This product is EOL - End of Life* 5.5-inch 1080p OLED with Wide Color Gamut + Tilt ArmProfessional grade camera-top monitor that can power your DSLR or mirrorless camera. (With Tilt Arm) Beautiful OLED in a convenient form factor.The FOCUS OLED is a very sharp, wide color gamut, touchscreen monitor that’s easy attach to a camera or rig. Shipping with every FOCUS OLED is the SmallHD Tilt Arm: a lightweight, camera-top mounting solution. Simple, convenient power.The FOCUS OLED monitor has an integrated Sony L Series battery plate and the unique ability to power popular DSLR and mirrorless cameras. Using the monitor’s 7.2 volt power output and camera specific adapter cables, operators can use one battery to power their camera and monitor for several hours. Powerful tools at your fingertips.Beyond the impressive hardware features of the FOCUS, is SmallHD OS3: a professional software toolset with an easy to manage, touchscreen interface. High resolution Scopes, Waveform, False Color, Focus Peaking, and real-time 3D LUTs are just some of the tools you can easily customize and access quickly.  

€1.00*
*Discontinued* SmallHD FOCUS Pro - 5", 800Nits, 3G-SDI, Touchscreen On-Camera Monitor
*This product is EOL - End of Life* 5-inch High Bright On-Camera Monitor. Ruggedly built SDI monitor with camera control for RED (sold separately). Designed specifically to pair with the RED® KOMODO™, Focus Pro maintains the same reliable SmallHD clarity, vivid color detail, and dynamic touchscreen camera control while offering an equal balance between durability and lightweight design.   Robust Design - The elegance of strength.Focus Pro fuses perfectly with KOMODO's compact, featherlight body: Constructed with a sturdy, milled aluminum chassis that weighs only 9.6 oz, Focus Pro withstands heavy everyday operation and frees you to operate on the fly, without the restrictions of weight.  3 x ¼”-20 mounting points make it easy to secure to a rig, and the new Focus Pro Hinge Mount (sold separately) gives KOMODO users the flexibility to tilt the monitor for optimal viewing. Brilliant LCD Monitoring - See everything.Focus Pro offers a radiant 5-inch display with sharp resolution and bright daylight visibility for accurate image control in every environment. The SDI input provides real-time monitoring, and retracting menus offer an unobstructed field of view, so you see exactly as KOMODO sees. SmallHD OS4 - Every tool you need for absolute precision. Simple 7-inch mounting solution.Rigging a 7-inch external monitor can be difficult while trying to maintain a low-profile, easy-to-use camera setup. That’s why we’ve made a more robust, 7-inch SmallHD Tilt Arm. Available in our FOCUS 7 Gimbal Accessory Pack, the 7-inch Tilt Arm provides a simple and convenient way to mount the FOCUS 7 on-camera or on-gimbal.   FEATURES 5",1280x720 Touchscreen Brightness: 800 nits SDI input with up to 1080p60 Waveform, False Color, Focus Assist, 3D LUTs, Pixel Zoom and more  TECHNICAL SPECS Panel Type: IPS LCD Touchscreen Size Diagonal: 5" Resolution: 1280x720, 294 PPI Brightness: 800 nits Input:1x 3G-/HD-/SD-SDI Output: Headphone Jack, 7.2V Power OS4 Power: 1x Sony L Series Battery Plate Touchscreen for navigating Pagebuilder OS Voltage: 7-16.4V Battery Capacity: 2000mAh - 6200mAh  

€1.00*
*Discontinued* TVlogic F-7H MK2 7", Full-HD, HD-SDI & HDMI, 3600Nits Field Monitor with PreTouch Key
*This product is EOL - End of Life*Successor model #F-7HS The F-7H mk2 is a 7’’ 1920x1080 resolution field monitor that offers max. luminance of 3,600nits with enhanced sharpness and peaking boost function via new image processing engine. While delivering the same high quality picture and professional features of the previous model, F-7H mk2 shows far less reflection with Anti-Glare film and faster access to frequent preset modes via front touch keys. FEATURES 3.600 nits maximum luminance 4x Preset touch keys offers fast and easy access to user´s setting HDR Emulation and Auto Flip Less reflection with Anti-Glare film HD-SDI & HDMI in-/output with Cross Conversion Including: Focus Assist, H/V Delay, Mono Only, Audio Level Meter, 3D LUT, Waveform, Vectorscope, … TECHNICAL SPECS Display: IPS-LCD Size: 7" Resolution: 1920 x 1080 Brightness: 3600 Nits Contrast Ratio:1200:1 Color Depth: 8-bit (16,7M) Inputs: 1x 3G-SDI, 1x HDMI, Embedded Audio Outputs: 1x 3G-SDI, 1x HDMI, Analog Stereo Dimensions: 21,1x 12,5x 2,8 cm Weight: 0,8 Kg

€1.00*
Ace 750 TX/RX HDMI only
  Ace 750 is a lightweight, compact, HDMI wireless video system with built-in antennas designed to be used with mirrorless cameras, camcorders, action cameras and A/V workflows. It sends uncompressed zero-delay, 4Kp30, HDR video and audio with up to 750 feet (230m) of range. Ace 750 is cross-compatible with Bolt 4K and Bolt 6 in 5GHz and 6GHz modes and is fully compliant with FCC and CE frequency usage and power output guidelines. Ace 750 features an integrated hole pattern for mounting and can be powered with NP-F or LP-E6 batteries using an optional L-shaped plate.The transmitter (TX) and receiver (RX) units automatically detect and select the 5Ghz or 6GHz RF channel with the least interference and employ Auto-Frequency Switching to maintain optimal signal quality. Ace comes paired out of the box. The TX can send video to up to six RX devices at the same time using the Bolt Manager app for iOS or Android.Ace 750 is built with the same reliable wireless technology found in our acclaimed Bolt product line. Because of this, Ace 750 is fully compatible with all Bolt 4K and Bolt 6 models. Features 4Kp30 10-bit HDR Zero-Delay wireless video (<0.001sec) Range: 750 feet / 228 m 6GHz auto frequency switching Multi-receiver capable - up to 6 Receivers per Transmitter 2x 2dBi internal antennas (AMC mode always on) Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: 1x HDMI 1.4b Type-A receptacle Color Sampling: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: Barrel conntecotr 7-18V Power Consuption: 6 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto only, 40 MHz only, no blocked frequencies Dimensions Transmitter: 11,2 x 8,1 x  2,54 cm / 4.39" x 3.19" x 1"Mountability: Multiple mounting options with M3 and 1/4-20” holes Weight: Transmitter: 187 g / 6.6 oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OLED display - Input video format, Selected frequency, Video Quality %, Link statusSwitched: On/Off Switch Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60  What's In The Box? 1 x Ace 750 Transmitter 1 x Ace 750 Receiver 1 x Lightstand Adapter 1/4-20in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A - HDMI Male Type A - 18in Cable 1 x PSU 18W AC Adapter 12VDC - 6ft Cable 1 x PTap to r/a barrel - 18in Cable    

€1.00*
Atomos Neon Series - 4K HDR Monitor-Recorder (17" / 24")
Neon is a series of precision on-set and in-studio 4K HDR monitor-recorder production workhorses where reliable and trustworthy monitoring is essential. The Neon comes in four sizes (17”, 24”, 31” and 55”) that can be synced together to provide an ecosystem of field monitors where accuracy of image representation and consistency of image is critical between crew members...all controlled by the Atomos App. Digital filmmaking re-imagined for today’s creatorThe Atomos Neon series is the beginning of a new journey for filmmakers by bringing together traditional filmmaking roles and pairing it with Atomos innovation and technology. We do this by combining RAW recording with cinema display technology for monitoring, on-screen production checking and review of creative intent, story flow and matching continuity between scenes. Neon streamlines the creative workflow from lens to viewing. We have adopted industry standard formats like ProRes RAW from major camera makers enabling the performance of ProRes and the flexibility of RAW into cinema productions and built for computer finishing. Neon performs real-time Dolby Vision processing to enable down-stream viewing on any Dolby Vision capable TV or monitor. The upshot is an on-set computer replacement merged with an ecosystem of field monitors that saves the creator time by allowing them to make more decisions in the moment of recording, playback, monitoring and editing. FEATURES Choose from 17” and 24” screen size The 31” and 55” version has no release date yet 1000nits brightness, true 10-bit, DCI-P3 (100%) DCI 4K (4096 x 2160) nativ resolution Supports up to DCI 4K/UHD 4K Bluetooth controlled via Atomos iOS app (AtomOS) or physical remote control Real-time recording and playback up to 4K60p including ProRes, -RAW, Cinema DNG, Avid DNx formats In/Out: 2x 12G-SDI, 1x HDMI Playout: 2x configurable BNC, 1x HDMI Atomos Button Bar Remote Control Unit (BBRCU)   TECHNICAL SPECS Display: Unique combination of advanced LED and LCD technologie Size: 17" / 24" Resolution: 2048 x 1080 (Neon17) / 4096 x 2160 (Neon24) Brightness: 1000 Nits Color Depth: True 10-bit Color Gamut: DCI-P3 100% coverage Inputs: 2x SDI, 1x HDMI, Outputs: 2x SDI, 1x HDMI, Input Voltage: tba Operation Power: 10-22W Dimensions:  - 17": 41,3x 25,3x 7,1 cm - 24": 59,4x 34,0x 73 cm  Weight:  - 17":4,5 Kg - 24": 8,6 Kg

€1.00*
Atomos Shinobi 7
Shinobi 7 combines a large 7” HDR screen with a calibrated peak brightness of 2200nits and the lightweight monitor-only functions of the original Shinobi. The Shinobi 7 can be used in the brightest of environments to monitor signals up to 4Kp60 via HDMI or SDI. An ideal directors’ monitor, focus pullers’ monitor, program or preview display for video switchers, and perfect for vloggers presenting to camera. FEATURES 7”, 1920 x 1200, 10-bit (8+2 FRC), touchscreen 2200nits brightness In/Out: 1x HDMI (2.0) 4K60p, 1x 3G-SDI 2Kp60 Bi-directional HDMI <--> SDI signal cross conversion AtomHDR provides Log to HDR conversion for display and loop out Built-in 3D LUT box TECHNICAL SPECS Display: IPS LCD Size: 7,2" Resolution: 1920 x 1200 Brightness: 2200 Nits Color Depth: 10-bit (8+2 FRC) Color Gamut: Rec.709 Inputs: 1x HDMI (2.0) 4K60p, 1x 3G-SDI 2Kp60 Outputs: 1x HDMI (2.0) 4K60p, 1x 3G-SDI 2Kp60 Input Voltage: 6.2 - 16.8V (Battery + DC in) Operation Power: 5.8 - 7.2V Dimensions: 19,8x 13,3x 3,9 cm Weight: 577g  

€1.00*
Atomos Sumo 19 SE - HDR, Studio Monitor & Raw Recorder with new pannel P3 quantum
NEW Quantum dot color, optically bonded panel covering the DCI-P3 gamut 19” Monitor/Recorder with RAW recording up to 6Kp30 and up to 2k in 240p. 4kp60 via SDI and HDMI with built in Log to HDR and custom 3D LUT slots. Live quad Channel HD switching and ISO recording. Record ProRes RAW, 10bit 422 ProRes/DNxHR recording. HDMI 2.0 and Quad SDI (3G QuadLink/6G/12G), support for Genlock and LTC timecode. FEATURES 19”, 1920 x 1080, 10-bit (8+2), touchscreen 1200nits Brightness, covering DCI-P3 color gamut Live quad channel HD switching and recording Cross conversion In/Out: Quad link 4x 3G-SDI or 12G singe link, 1x HDMI Playout: 1x 4K-SDI 12G/6G or HD-SDI 3G/1.5G, 1x HDMI TECHNICAL SPECS Display: SuperAtom IPS panel, touchscreen Size: 19" Resolution:  1920 x 1080 Brightness: 1200 Nits Color Depth: 10-bit (8+2) Color Gamut: DCI P3 Inputs: Quad link 4x 3G-SDI (coming soon) or up to 12G single link SDI, 1x HDMI Outputs: 1x 4K-SDI 12G/6G or HD-SDI 3G/1.5G, 1x HDMI Input Voltage: 14.4V nominal; DC in 12 - 16.8V Dimensions: 50,4x 33,0x 18,0 cm (with stand) Weight: 6,0 Kg (with stand) RECORDING Pre-roll record (HD 8s, 4K 2s) Supported media: 2.5” SSD/HDD compatibility depends on recording format, resolution and frame rate (see: atomos.com/drives) Master caddy dock: 2.5” SATA to USB 2.0/3.0 Supported applications: Supported Applications FCPX/FCP7+ /Media Composer 5.0+ / Premiere 5.5+ EDIUS 6.0+ / Vegas Pro 10+ / Lightworks /Autodesk Smoke 2015  

€1.00*
Bolt 6 Monitor Module 750 Int Ant RX V Mount
  Bolt 6 RX Monitor Module is a wireless video receiver that supports up to 4K30 10-bit 422 HDR video. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With this direct integration, the Bolt 6 and Smart monitor can share power and video, allowing you to reduce the amount of cables on set. With the Bolt 6 Monitor Module, Wireless Camera-Control is also possible because it integrates directly into SmallHD Smart Monitors. Bolt 6 Monitor Module RX offers two line-of-sight options: 750 ft. and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates.The 750 model includes V (vertical) Antennas. 1500 model includes both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 Monitor Module RX can include a permanent internal antenna to allow for reliable zero-delay transmission in a more compact and durable form factor. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay  What's In The Box? Bolt 6 Monitor Module 750 RX V-Mount HDMI Adapter Bolt 4K RX Monitor Module    

€1.00*
Canon DP-V1711 17.3-inch 4K UHD professional display with 12G-SDI and extensive HDR function
  Robust and compact 17-inch 4K UHD display for critical picture monitoring in Studio and OB Vans.Features both 12G-SDI and HDMI inputs, a rack mount option, plus support for HDR EOTFs and extensive HDR compatibel functions FEATURES 17.3" LCD Panel Resolution 3840 x 2160, true 10-bit HD-SDI/3G-SDI/6G-SDI/12G-SDI input support (up to 4096x2160 p60) Brightness: 300Nits / 600Nits available with an additional purchased license, and wehn "Bost on" is selected 4x 3G/6G/12G-SDI input 4x 3G/6G/12G-SDI pass-through output 1x HDMI 2.0 input TECHNICAL SPECS Size: 17.3" Resolution: 3840 x 2160 / 4K UHD Brightness: 300Nits Input: 4x BNC 12G/6G/3G/HD/SD-SDI Output: 4x BNC 12G/6G/3G/HD/SD-SDI SDI Input Signal Formats: up to 3840 x 2160p60 Power: AC 100~240V (50/60 Hz) DC 12V max. 10A, XLR Dimensions with stand: 43,5 x 35,6 x 19,4 cm Dimensions Monitor only: 43,5 x 30,8 x 15,4 cm Weight: 8 Kg

€1.00*
Canon DP-V1830 4K/UHD HDR Dual/Quad Display Monitor
  Canon DP-V1830 Professional DisplayWith a compact and lightweight design for either studio or on-set environments, the DP-V1830 Professional Monitor provides exceptional 4K HDR imaging performance. 18” Display with Exceptional BrightnessThe DP-V1830 features an 18-inch 4K UHD LCD Panel with full-screen and uniform brightness up to 1,000 cd/m². Complimented by an ultra-low black level of 0.001 cd/m², this monitor produces flawless HDR performance and accuracy. Simultaneous Dual/Quad Display and 8K SupportThe DP-V1830 supports simultaneous viewing up to 4K in either Dual or Quad array for consolidated multi-cam monitoring. It is also capable of supporting 8K signals, ready for future high-resolution workflows.   TECHNICAL SPECS Size: 18.4" / 46,9 cm Panel: α-SI TFT Active Matrix LCD Resolution: 3840 x 2160 (UHD) Brightness: 1000 nits Viewing angle: 89°/89°/89°/89° Aspect Ratio: 16:9 Pixel Pitch: 238 ppi Video Inputs: 4x 12G/6G/3G/HD/SD-SDI,1x HDMI (Type-A) Video Outputs: 4x 12G/6G/3G/HD-SDI, Pass-through; Multifunc. SDI Out* Power Inputs:1x  XLR-type 3pin (m), 22V-32V DC Data I/O: 1x RJ45 8pin (Parallel Remote), 1x Ethernet 10BASE-T/1000BASE-TX RJ45 (Serial Remote LAN) LUTs: 33 grid point or 17 grid point .cube files are supported, User 3D LUT, Audio: 2x stereo mini-jack (front/rear) Other: USB A receptacle terminal LAN: RJ-45 terminal Remote: RJ-45 terminal, GPI 8pin Power Requirements: AC 100V - 240V, Rated frequency: 50/60 Hz; DC 24V (22-28V), Max. allowable current 10A, XLR terminal Power Consumption: At max. load (incl. change in brightness due to aging): approx. 210W (185W via DC) Dimensions with handle and with stand (HxWxD): 44,3x 37,2x 18,0 cm Dimensions display unit only, without protruding parts (HxWxD): 44,3x 31,0x 13,0 cm Weight: 7.5 Kg * For expanded functionality in future firmware updates.   FEATURES 4K/UHD 18.4” 10-bit LCD monitor 1000Nits Brightness 12G-SDI Video input Advanced HDR Monitoring: Waveform Monitor, False Colour, Range Check and much more Dual/Quad Display and 8K Support Exceptional Image Quality: Delivering Dolby Vision and EBU TECH3320 standards* * Grade 1A rating achieved for contrast ratio, peak luminance, black level, luminance uniformity and delay time.    

€1.00*
Canon DP-V2730 27-inch 4K reference HDR monitor
  Canon DP-V2730A powerful and flexible 27-inch 4K reference monitor for exceptional HDR imaging performance; ideal for live broadcast and post-production.An advanced professional 4K HDR Display for the new generationWith a 27-inch screen and 1,000 cd/m² full screen peak brightness, the DP-V2730 reference monitor has a suite of award-winning monitoring tools such as a waveform monitor, pixel value check and configurable false colour, driven by Canon’s latest processing platform for class-leading performance. Award-winning Advanced HDR Monitoring ToolsThe DP-V2730 features Canon’s award-winning advanced HDR monitoring tools to assist in evaluating HDR content over every aspect of the displayed signal. HDR Waveform Monitor/RGB Parade: Analyse the brightness of an image from left to right with a monitor scale supporting IRE, PQ, HLG and even Log signals from multiple manufacturers. HDR False Colour: Visually represents exposure and image clipping based on detailed and customisable colour scales for IRE, PQ or HLG. Range Check: Switches the display output to monochrome and enables users to specify a peak brightness level to easily identify areas that require adjustment. Pixel Value Check/ Chromaticity Diagram: Accurately examine the colour and brightness values of a specific pixel. A CIE diagram is also displayed to illustrate the pixel colour space location or overall gamut of the entire image. Out of Gamut Display: Switches the display output to monochrome and highlights colours outside the selected colour gamut. Users can select either ITU-R BT.709 or Native gamut. HDR/ SDR Compare View: An advanced function that converts HDR content to SDR for side-by-side evaluation. This function can be used to compare original content alongside enabled User LUTs or CDLs. HDR Histogram: A graphical representation of the brightness distribution in an image. This feature can also illustrate SDR and HDR brightness ranges. Frame Luminance Monitor: An innovative tool that allows users to closely monitor changes in peak brightness over time when viewing video sequences. Multi Information View: Utilise multiple HDR monitoring tools simultaneously without obstructing the displayed image. 27” Display with Exceptional BrightnessThe DP-V2730 features a 27-inch 4K UHD LCD Panel with full-screen and uniform brightness up to 1,000 cd/m². Canon’s local dimming technology gives an ultra-low black level of 0.001 cd/m².Faithful HDR Colour ReproductionCanon’s cutting-edge brightness, detailed shadows and wide colour gamut across the entire screen achieve Dolby Vision certification and Grade1A in EBU TECH3320 standards2.Simultaneous Dual/Quad Display and 8K SupportView up to 4K in either Dual or Quad array from both SDI and HDMI signals, as well as individual Picture Profiles or User LUTs. DP-V2730 supports future high-resolution 8K workflows.Uncompromised ConnectivityThe DP-V2730 has an HDMI input and 12G-SDI Terminals (4x Inputs and 5x Outputs) capable of delivering 4K60P 4:2:2 10-bit or 4K30P 4:4:4 12-bit signals, ideal for seamless integration into multiple workflows.Remote Control/ Multi-Display LinkLink the DP-V2730 to a computer, tablet or smartphone plus multiple Canon Displays (via a LAN connection) with the Remote Control Web UI. This touch-optimised interface provides live image viewing, detailed signal information and direct control over inputs, monitoring tools and settings.In-built SDI SwitcherUse 4-way SDI input switching thanks to a MULTI-FUNC SDI Output3 that supports workflow applications such as sending an output feed to a director’s monitor, external recorder or live steaming solution.   ___________________________ Specifications___________________________ 27” 4K HDR Display: 3840 x 2160 LCD panel providing 1,000 cd/m² full-screen brightness Advanced HDR Monitoring: Waveform Monitor, False Colour, Range Check and much more Exceptional Image Quality: Delivering Dolby Vision and EBU TECH3320 standards Dual/Quad Display and 8K Support: For seamless multi-cam monitoring and high-resolution workflows Remote Control/Multi-Display Link: Can be linked to a computer, tablet, or smartphone for remote control Uncompromised Connectivity: 1x HDMI input and 12G-SDI Terminals (4x Inputs and 5x Outputs) Specifications in detailPanel Panel Type: a-Si TFT Active Matrix LCD Panel Screen Size: 27 inch (68.5 cm) Aspect Ratio: 16:9 Resolution: 3840 x 2160 (8.3 megapixels) Active Display Area: Approx. 596.7x335.7 mm Pixel Pitch: 155.4 μm Image Quality Brightness: Standard: 100 cd/m2 / Peak, Full screen white: 1,000 cd/m21 Viewing Angle (Up, Down, Left, Right): 89° (contrast ratio 10:1 or higher) Surface Treatment: Anti glare coating General Backlight Type: LED, Matrix Array Power: Rated voltage: AC 100 - 240 V Rated frequency: 50/60 Hz Power Consumption At maximum load (including luminance changes over time): Approx. 525W At factory shipment: Approx. 125 W In standby mode: 0.5W or less Environmental Conditions Temperature and humidity: 0 to 40℃ (32 - 104°F) (20 - 85 % RH no condensation) Recommended: 15 - 30 ℃ (59 - 86 °F) (20 - 80% RH no condensation) Pressure: 700 - 1060 hPa Storage/Transporting Temperature and humidity: -20 to 40℃ (-4 - 104°F) (20 - 85 % RH no condensation) 41 to 60℃ (105 - 140°F) (20 - 30 % RH no condensation) Pressure: 700 - 1060 hPa Dimensions (W x H x D) & Weight Approx. 635×447×214mm (including stand and handle) Approx. 635×426×158mm (display unit only, without protruding parts) Weight: Approx. 16.0 kg Mounting Hole Pitch: VESA standard 200x100 mm InterfaceInput: 12G/6G/3G/HD/SD-SDI: 4x BNC (75 Ω) terminals 12G-SDI: SMPTE 2082 compliant 6G-SDI: SMPTE 2081 compliant 3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant SD-SDI: SMPTE 259M compliant HDMI: 1x Type A terminal Copy protection: HDCP 2.3 / 1.4 Output: 12G/6G/3G/HD-SDI: 4x (Pass-through) BNC (75 Ω) terminals MULTIFUNC. SDI OUT2: 1x BNC (75 Ω) terminal Speakers: 2W (stereo) Headphone / Audio Output: 2x stereo mini-jacks (front / rear), supported impedance: 32 Ω - 64 Ω Others: USB: 1x USB A receptacle terminal Universal Serial Bus Specification Revision 3.0 compliant LAN: 1x RJ-45 terminal IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T compliant GPI: 1x RJ-45 terminal    

€1.00*
Canon DP-V3120 31-inch 4K HDR professional reference display
  Canon DP-V3120 - The 31-inch 4K HDR professional reference display Extraordinary HDR capabilityCanon DP-V3120 is a 31-inch 4K HDR Professional Reference Display which provides industry leading 2,000 cd/m2 of full-screen brightness and 2,000,000:1 contrast ratio with exceptional accuracy and consistency, alongside extensive HDR monitoring assist functions. DP-V3120 is ideal for professional HDR production workflows. Full-screen brightness at 2,000 cd/m2, 2,000,000:1 contrast ratioCanon DP-V3120 provides an incredible 2,000 cd/m2 of full-screen brightness, giving you higher flexibility to create stunning High Dynamic Range content. With a Canon developed cutting-edge backlight system, precise LED control algorithm and advanced image processing, DP-V3120 is able to deliver a minimum black level of 0.001 cd/m2 and an outstanding 2,000,000:1 contrast ratio, ensuring accurate reproduction of shadow detail and brighter highlights.Accurate image quality with flexibility for all production requirementsPrecise image reproduction is important for proper HDR monitoring. DP-V3120 can accurately achieve full range grey scale reproduction from low luminance to high luminance, as well as each R, G, B primaries delivering the appropriate luminance level. This level of accuracy offers greater confidence to manage HDR mastering workflows. With support for conventional 2.2, 2.4, 2.6, and ITU BT.1886 gamma, as well as HDR Electro-Optical Transfer Functions (EOTF) SMPTE ST.2084 and ITU-R BT.2100 (HLG), DP-V3120 also supports BT.2020 and DCI-P3 wide colour spaces with faithful and consistent colour reproduction to meet both SDR and HDR production requirements. Extensive HDR monitoring functionsCanon DP-V3120 provides industry leading extensive HDR monitoring functions, these enable users to visualise HDR signal parameters such as HDR Reference white, signal levels, and image brightness for accurate signal optimisation. HDR waveform monitor / Vector-scope Pixel value checker HDR histogram HDR false colour Frame luminance monitor BT.2020 outside of gamut view HDR over range check HDR / SDR comparison Reliable and quiet operationCanon’s innovative backlight system, with highly efficient LEDs and newly designed cooling mechanism, enables and maintains a high continuous luminance level, even at 2,000 cd/m2. This newly designed cooling mechanism achieves quiet operation with high brightness, ideal for environments such as grading suites. Additionally, Canon’s innovative backlight system uses a full screen sensor array to monitor the backlight performance, while using an intelligent auto correction technology to maintain and adjust image accuracy during operation. Advanced interface and operabilityDP-V3120 is equipped with a 12G-SDI interface to fit the latest 4K production environments, enabling a 4K signal over a single SDI cable. With four 12G-SDI interface terminals, the display can handle multiple 4K signals, providing a 4-screen split view, single 4K image, or single 8K image (displayed in 4K) is also possible.DP-V3120 supports Payload ID to identify signal’s transfer characteristics, and the Auto Setting function enables automatic switching of the Display’s [Picture Mode] settings. Additionally, signal monitoring functions enable DP-V3120 to identify signal errors such as lack of or wrong order of 2SI signals and CRC errors. Remote controlDP-V3120 can be remotely controlled by LAN connection using either a PC or tablet enabling access to the menu, as well as various display information. View (initial screen): Checking and zooming of the displayed image. Simple Channel and Function button operations. Information: Access to display settings and signal information. Control / Setting / Link: Access to full menu controls, settings and link to other monitors. ____________________________ Specifications____________________________ 4K - (4096 x 2160) resolution UHD - (3840 x 2160) resolution DCI - (2048 x 1080) resolution 12G-SDI- Supporting 4 x 12G-SDI Supporting HDR standards - ITU-R BT.2100 and SMPTE ST 2084   Panel Panel type: IPS LCD panel Screen size: 31.1 inch (79.0 cm) Aspect Ratio: 17:9 Resolution: 4096×2160 (8.8 megapixels) Active display area: Approx. 698.0×368.1 mm Pixel Pitch: 170 μm/149 ppi   General Backlight type: LED, Matrix Array Power: Rated voltage: AC 100 - 240 V / Rated frequency: 50/60 Hz Power Consumption: At maximum load (including change in brightness due to aging): Approx. 840W / At factory shipment: Approx. 175 W Dimensions (width x height x depth): Approx. 749×492×335 mm (including handle) / Approx. 749×470×295 mm (Display unit only, without protruding parts) Weight: Approx. 31 kg Mounting Hole Pitch: VESA standard 200×200 mm   Interface Input: 12G/6G/3G/HD/SD-SDI 4 (1 channel) BNC (75 Ω) Receptacle terminal 12G-SDI: SMPTE 2082 compliant 6G-SDI: SMPTE 2081 compliant 3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant SD-SDI: SMPTE 259M compliant HDMI: 1 Type A / Copy protection: HDCP 2.2 Output: 12G/6G/3G/HD-SDI 4 (Pass-through 1 channel) Headphone: 1 stereo mini-jack, supported impedance: 32 Ω - 64 Ω Others: 1 USB A receptacle terminal Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant 1 RJ-45 terminal IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant 1 RJ-45 terminal, GPI 8 pin  

€1.00*
Canon DP-V3120 31-inch 4K HDR professional reference display
  Canon DP-V3120 - The 31-inch 4K HDR professional reference display Extraordinary HDR capabilityCanon DP-V3120 is a 31-inch 4K HDR Professional Reference Display which provides industry leading 2,000 cd/m2 of full-screen brightness and 2,000,000:1 contrast ratio with exceptional accuracy and consistency, alongside extensive HDR monitoring assist functions. DP-V3120 is ideal for professional HDR production workflows. Full-screen brightness at 2,000 cd/m2, 2,000,000:1 contrast ratioCanon DP-V3120 provides an incredible 2,000 cd/m2 of full-screen brightness, giving you higher flexibility to create stunning High Dynamic Range content. With a Canon developed cutting-edge backlight system, precise LED control algorithm and advanced image processing, DP-V3120 is able to deliver a minimum black level of 0.001 cd/m2 and an outstanding 2,000,000:1 contrast ratio, ensuring accurate reproduction of shadow detail and brighter highlights.Accurate image quality with flexibility for all production requirementsPrecise image reproduction is important for proper HDR monitoring. DP-V3120 can accurately achieve full range grey scale reproduction from low luminance to high luminance, as well as each R, G, B primaries delivering the appropriate luminance level. This level of accuracy offers greater confidence to manage HDR mastering workflows. With support for conventional 2.2, 2.4, 2.6, and ITU BT.1886 gamma, as well as HDR Electro-Optical Transfer Functions (EOTF) SMPTE ST.2084 and ITU-R BT.2100 (HLG), DP-V3120 also supports BT.2020 and DCI-P3 wide colour spaces with faithful and consistent colour reproduction to meet both SDR and HDR production requirements. Extensive HDR monitoring functionsCanon DP-V3120 provides industry leading extensive HDR monitoring functions, these enable users to visualise HDR signal parameters such as HDR Reference white, signal levels, and image brightness for accurate signal optimisation. HDR waveform monitor / Vector-scope Pixel value checker HDR histogram HDR false colour Frame luminance monitor BT.2020 outside of gamut view HDR over range check HDR / SDR comparison Reliable and quiet operationCanon’s innovative backlight system, with highly efficient LEDs and newly designed cooling mechanism, enables and maintains a high continuous luminance level, even at 2,000 cd/m2. This newly designed cooling mechanism achieves quiet operation with high brightness, ideal for environments such as grading suites. Additionally, Canon’s innovative backlight system uses a full screen sensor array to monitor the backlight performance, while using an intelligent auto correction technology to maintain and adjust image accuracy during operation. Advanced interface and operabilityDP-V3120 is equipped with a 12G-SDI interface to fit the latest 4K production environments, enabling a 4K signal over a single SDI cable. With four 12G-SDI interface terminals, the display can handle multiple 4K signals, providing a 4-screen split view, single 4K image, or single 8K image (displayed in 4K) is also possible.DP-V3120 supports Payload ID to identify signal’s transfer characteristics, and the Auto Setting function enables automatic switching of the Display’s [Picture Mode] settings. Additionally, signal monitoring functions enable DP-V3120 to identify signal errors such as lack of or wrong order of 2SI signals and CRC errors. Remote controlDP-V3120 can be remotely controlled by LAN connection using either a PC or tablet enabling access to the menu, as well as various display information. View (initial screen): Checking and zooming of the displayed image. Simple Channel and Function button operations. Information: Access to display settings and signal information. Control / Setting / Link: Access to full menu controls, settings and link to other monitors. ____________________________ Specifications____________________________ 4K - (4096 x 2160) resolution UHD - (3840 x 2160) resolution DCI - (2048 x 1080) resolution 12G-SDI- Supporting 4 x 12G-SDI Supporting HDR standards - ITU-R BT.2100 and SMPTE ST 2084   Panel Panel type: IPS LCD panel Screen size: 31.1 inch (79.0 cm) Aspect Ratio: 17:9 Resolution: 4096×2160 (8.8 megapixels) Active display area: Approx. 698.0×368.1 mm Pixel Pitch: 170 μm/149 ppi   General Backlight type: LED, Matrix Array Power: Rated voltage: AC 100 - 240 V / Rated frequency: 50/60 Hz Power Consumption: At maximum load (including change in brightness due to aging): Approx. 840W / At factory shipment: Approx. 175 W Dimensions (width x height x depth): Approx. 749×492×335 mm (including handle) / Approx. 749×470×295 mm (Display unit only, without protruding parts) Weight: Approx. 31 kg Mounting Hole Pitch: VESA standard 200×200 mm   Interface Input: 12G/6G/3G/HD/SD-SDI 4 (1 channel) BNC (75 Ω) Receptacle terminal 12G-SDI: SMPTE 2082 compliant 6G-SDI: SMPTE 2081 compliant 3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant SD-SDI: SMPTE 259M compliant HDMI: 1 Type A / Copy protection: HDCP 2.2 Output: 12G/6G/3G/HD-SDI 4 (Pass-through 1 channel) Headphone: 1 stereo mini-jack, supported impedance: 32 Ω - 64 Ω Others: 1 USB A receptacle terminal Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant 1 RJ-45 terminal IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant 1 RJ-45 terminal, GPI 8 pin  

€1.00*
Dwarf Connection CLR2.MKII - TX/RX 300m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
"C" stands for compact - and that is what CLR2 is all about. Wireless video with no external antennas, it is small and pracitcal. Its transmission range of 300m makes it ideal for film sets and similar production environments. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 300ft/ 1000m LOS Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 13,1 x 7,2 x 2,2 cm Dimensions Receiver (with Antennas): 14,1 x 10,0 x 2,2 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510   What's In The Box? 1 x Dwarf CLR2.MKII Transmitter 3x Flexible Sword Antennas 1 x Dwarf CLR2.MKII Receiver with Antenna cap 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case   Please note these units are only allowed for indoor-use.

€1.00*
Dwarf Connection Fixed Mushroom Antennas
A more powerful and very compact alternative to the stub antennas. What's In The Box? 2x Fix Mushroom Antennas

€1.00*
Dwarf Connection Flexible Clover Leaf Antennas
Circular polarization - when proper alignment of your device is hard to archieve. Very good option for gimbal operation or drone use (indoor). What's In The Box? 2x Flexible Clover Leaf  

€1.00*
Dwarf Connection Flexible Sword Antennas
Dwarfs standard antennas; light, flexible, powerful. Make sure the flat surface of the antennas is facing the RX direction. What's In The Box? #DC.X.0020 2x Fix Mushroom Antennas   What's In The Box? #DC.X.0023 5x Fix Mushroom Antennas

€1.00*
Dwarf Connection L1.MKII - Receiver only, 1200m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! Depending on which transmitter you are using, the X.LINK.L1 can receive signals from between 500 and 1200 meters away.   Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI Outputs: 3G-SDI, HDMI V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1200m LOS up to 8200feet / 2500m with RX Patch Antenna RE-2 Video Inputs: Wireless Video Outputs: 2x 3G-SDI, 1x HDMI Type-A SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Receiver (without Antennas): 14,8 x 10,0 x 2,0 cm Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf ULR1.MKII Receiver V-Mount 6 x RX Omnidirectional Rod Antannas 1x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20  

€1.00*
Dwarf Connection Mini Mushroom Antennas
A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0033 2x Mini Mushroom Antennas  What's In The Box? #DC.X.0035 5x Mini Mushroom Antennas

€1.00*
Dwarf Connection RX Omnidirectional Rod Antennas
A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0034 2x RX Omnidirectional Rod Antennas  What's In The Box? #DC.X.0015 5x RX Omnidirectional Rod Antennas

€1.00*
Dwarf Connection RX Patch Antenna
Extend your receiver range up to 2500m / 8.202ft What's In The Box? 1x RE Antenna 5x Antenna cable

€1.00*