Dwarf Connection CLR2.MKII - TX/RX 300m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
Product information "Dwarf Connection CLR2.MKII - TX/RX 300m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only"
"C" stands for compact - and that is what CLR2 is all about. Wireless video with no external antennas, it is small and pracitcal. Its transmission range of 300m makes it ideal for film sets and similar production environments.
Features
- Zero-Delay wireless video (<0.001sec)
- Up to 1080p60
- Inputs: 3G-SDI, HDMI 1.4
- Outputs: 3G-SDI, HDMI 1.4
- V-Mount Battery Plate option for Receiver
- Rec Trigger: HD-SDI and HDMI (with limitations)
- Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers
- DSC Scan: Built-in frequency scanner (via HDMI)
Technical Specs
- Range: 300ft/ 1000m LOS
- Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle
* 1x Loop-out 3G-SDI on Transmitter - Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle
- SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers
- Record Trigger: via SDI and HDMI
- Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit
- Delay: <0.001sec
- Video Compression: visually lossless
- Input Cross Conversion: Yes, HDMI to SDI
- Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate
- Power Consuption: TX: 8 Watts; RX: 8 Watts
- Audio compression: 48kHz 24-bit PCM
- RF Channel Selection: Auto (only INDOOR USE allowed)
- DC-SCAN via HDMI for channel selection before use necessary
- Dimensions Transmitter (without Antennas): 13,1 x 7,2 x 2,2 cm
- Dimensions Receiver (with Antennas): 14,1 x 10,0 x 2,2 cm
- Weight: Transmitter: 380g
- Weight: Receiver: 540g
- Multiple mounting options with 1/4" holes
- Configuration Interface: Oled dispay via 3 buttons
Support Resolutions:
- 1080p 23.98/24/25/29.97/30/50/59.94/60
- 1080i50/59.94/60
- 720p50/59.94/60
- 480p59.94/576p50
- 480i59.94
Wireless Non-DFS Frequencies:
- 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510
What's In The Box?
- 1 x Dwarf CLR2.MKII Transmitter
- 3x Flexible Sword Antennas
- 1 x Dwarf CLR2.MKII Receiver with Antenna cap
- 2x 4pin - DTap Cables
- 2x AC Adapter
- 1x Magicarm 1/4"-20 - 1/4"-20
- 1x USB flash drive with manual
- 1x Quick Start Quide
- 1x Case
Please note these units are only allowed for indoor-use.
Accessory Items
Dwarf Connection L1.MKII - Receiver only, 1200m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
€1.00*
Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! Depending on which transmitter you are using, the X.LINK.L1 can receive signals from between 500 and 1200 meters away.
Features
Zero-Delay wireless video (<0.001sec)
Up to 1080p60
Inputs: 3G-SDI, HDMI
Outputs: 3G-SDI, HDMI
V-Mount Battery Plate option for Receiver
Rec Trigger: HD-SDI and HDMI (with limitations)
Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers
DSC Scan: Built-in frequency scanner (via HDMI)
Technical Specs
Range: 4000ft/ 1200m LOS
up to 8200feet / 2500m with RX Patch Antenna RE-2
Video Inputs: Wireless
Video Outputs: 2x 3G-SDI, 1x HDMI Type-A
SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers
Record Trigger: via SDI and HDMI
Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit
Delay: <0.001sec
Video Compression: visually lossless
Input Cross Conversion: Yes, HDMI to SDI
Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate
Power Consuption: RX: 8 Watts
Audio compression: 48kHz 24-bit PCM
RF Channel Selection: Auto (only INDOOR USE allowed)
DC-SCAN via HDMI for channel selection before use necessary
Dimensions Receiver (without Antennas): 14,8 x 10,0 x 2,0 cm
Weight: Receiver: 540g
Multiple mounting options with 1/4" holes
Configuration Interface: Oled dispay via 3 buttons
Support Resolutions:
1080p 23.98/24/25/29.97/30/50/59.94/60
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50
480i59.94
Wireless Non-DFS Frequencies:
5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510
What's In The Box?
1 x Dwarf ULR1.MKII Receiver V-Mount
6 x RX Omnidirectional Rod Antannas
1x 4pin - DTap Cables
2x AC Adapter
1x Magicarm 1/4"-20 - 1/4"-20
Dwarf Connection RX Patch Antenna
€1.00*
Extend your receiver range up to 2500m / 8.202ft
What's In The Box?
1x RE Antenna
5x Antenna cable
Dwarf Connection Flexible Sword Antennas
€1.00*
Dwarfs standard antennas; light, flexible, powerful.
Make sure the flat surface of the antennas is facing the RX direction.
What's In The Box? #DC.X.0020
2x Fix Mushroom Antennas
What's In The Box? #DC.X.0023
5x Fix Mushroom Antennas
Dwarf Connection Mini Mushroom Antennas
€1.00*
A more powerful and also ultra compact alternative to the stub antennas.
Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller.
What's In The Box? #DC.X.0033
2x Mini Mushroom Antennas
What's In The Box? #DC.X.0035
5x Mini Mushroom Antennas
Dwarf Connection ULR1.MKII - TX/RX 1200m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
€1.00*
The DC-Link- ULR1 is a high-performance WHDI video transmission system which transmits uncompressed video and audio signals up to 1200m with low latency (1 ms delay). Due to the conscious decision not to implement DFS (Dynamic Frequency Selection), which is compulsory for outdoor use, the device has a longer range, greater stability and better usability than comparable systems. The transmitter and receiver both have 3G-SDI and HDMI connectors. When a video source is attached, the transmitter automatically selects the input (SDI is prioritised). The receiver’s 3G-SDI and HDMI outputs can be used simultaneously.
Features
Zero-Delay wireless video (<0.001sec)
Up to 1080p60
Inputs: 3G-SDI, HDMI 1.4
Outputs: 3G-SDI, HDMI 1.4
V-Mount Battery Plate option for Receiver
Rec Trigger: HD-SDI and HDMI (with limitations)
Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers
DSC Scan: Built-in frequency scanner (via HDMI)
Technical Specs
Range: 4000ft/ 1200m LOS
up to 8200feet / 2500m with RX Patch Antenna RE-2
Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter
Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle
SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers
Record Trigger: via SDI and HDMI
Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit
Delay: <0.001sec
Video Compression: visually lossless
Input Cross Conversion: Yes, HDMI to SDI
Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate
Power Consuption: TX: 8 Watts; RX: 8 Watts
Audio compression: 48kHz 24-bit PCM
RF Channel Selection: Auto (only INDOOR USE allowed)
DC-SCAN via HDMI for channel selection before use necessary
Dimensions Transmitter (without Antennas): 14,4 x 7,5 x 2,1 cm
Dimensions Receiver (without Antennas): 14,8 x 7,5 x 2,1 cm
Weight: Transmitter: 380g
Weight: Receiver: 540g
Multiple mounting options with 1/4" holes
Configuration Interface: Oled dispay via 3 buttons
Support Resolutions:
1080p 23.98/24/25/29.97/30/50/59.94/60
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50
480i59.94
Wireless Non-DFS Frequencies:
5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510
What's In The Box?
1 x Dwarf ULR1.MKII Transmitter
3 x Flexible Sword Antennas
1 x Dwarf ULR1.MKII Receiver V-Mount
6 x RX Omnidirectional Rod Antannas
2x 4pin - DTap Cables
2x AC Adapter
1x Magicarm 1/4"-20 - 1/4"-20
1x USB flash drive with manual
1x Quick Start Quide
1x Case
Please note these units are only allowed for indoor-use.
Dwarf Connection S1.MKII - Receiver only, 300m LOS, NON-DFS, 3G-SDI/HDMI, indoor use only
€1.00*
Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! Depending on which transmitter you are using, the X.LINK.S1 can receive signals from up to 500 meters away.
Features
Zero-Delay wireless video (<0.001sec)
Up to 1080p60
Inputs: 3G-SDI, HDMI
Outputs: 3G-SDI, HDMI
Receiver with Antenna Cap
Rec Trigger: HD-SDI and HDMI (with limitations)
Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers
DSC Scan: Built-in frequency scanner (via HDMI)
Technical Specs
Range: 4000ft/ 1000m LOS
Video Inputs: Wireless
Video Outputs: 2x 3G-SDI, 1x HDMI Type-A
SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers
Record Trigger: via SDI and HDMI
Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit
Delay: <0.001sec
Video Compression: visually lossless
Input Cross Conversion: Yes, HDMI to SDI
Power Input: 4-pin Connector 7.2-18 V DC
Power Consuption: RX: 8 Watts
Audio compression: 48kHz 24-bit PCM
RF Channel Selection: Auto (only INDOOR USE allowed)
DC-SCAN via HDMI for channel selection before use necessary
Dimensions Receiver 14,8 x 10,0 x 2,2 cm
Weight: Receiver: 376,6g
Multiple mounting options with 1/4" holes
Configuration Interface: Oled dispay via 3 buttons
Support Resolutions:
1080p 23.98/24/25/29.97/30/50/59.94/60
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50
480i59.94
Wireless Non-DFS Frequencies:
5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510
What's In The Box?
1 x Dwarf Link S.MKII Receiver
1x 4pin - DTap Cables
2x AC Adapter
1x Magicarm 1/4"-20 - 1/4"-20
Dwarf Connection Fixed Mushroom Antennas
€1.00*
A more powerful and very compact alternative to the stub antennas.
What's In The Box?
2x Fix Mushroom Antennas
Dwarf Connection Flexible Clover Leaf Antennas
€1.00*
Circular polarization - when proper alignment of your device is hard to archieve.
Very good option for gimbal operation or drone use (indoor).
What's In The Box?
2x Flexible Clover Leaf
Dwarf Connection RX Omnidirectional Rod Antennas
€1.00*
A more powerful and also ultra compact alternative to the stub antennas.
Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller.
What's In The Box? #DC.X.0034
2x RX Omnidirectional Rod Antennas
What's In The Box? #DC.X.0015
5x RX Omnidirectional Rod Antennas