The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won't be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps - you can get a maximum of 15 Amps Output.The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a maximum loss in sub zero temperatures of half the capacity.A 4-level indicator shows you the remaining capacity. There's a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.Specifications Capacity:  10.5Ah 270Wh Voltage: 26V D-Tap In- / Output: Yes (1x) 26V Current: 15.0A(max.) Dimensions: 152(L)mm×97(W)mm×65(H)mm Weight: 1.190g In the box 1 × BP7S270 - 270Wh/26V Battery VM  

This battery has a capacity of 48Wh and is compatible with Sony NP-F devices.Specifications Capacity:  6.6Ah 48Wh Voltage: 7.4V Dimensions: 70(L)*39(W)*60(H)mm Weight: 270g Features: Build-in multi protection Compatibility: Substitute of Sony NP In the box 1 × DF-248 - Sony NP-F Substitute Battery  

The Cool Blue Series features V-Mount / Gold-Mount batteries with an LCD screen which shows you the battery cycle, voltage, lasting time, and capacity percentage. So you always know where you at. USB-A, D-TAP and DC In/Outputs give you more than just one option to power your equipment. The battery can be charged and discharged over D-TAP and the V- / Gold-Mount pins. It has a built in protection-circuit – as all our batteries do – that protects the battery and used electronic equipment against over-heating, overcharge, over-discharge and over-current. The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity. With capacities ranging from 100Wh to 250Wh you can choose what fits your needs.Specifications Capacity: 16.75Ah 250Wh Voltage: 14.8V Features: LCD Indicator D-Tap Input/Output: Yes (1x) USB-A Output: 5.0V/2.0A DC 2.1 Pin Out-/ Input: 10.0-16.8V     Current: 12A (max.) Dimensions: 158(L)mm*100(W)mm*64.5(H)mm Weight: 1.190g In the box 1 × BP-250SL - 250Wh V-Mount Battery  

The demand for higher power batteries let us to reimagine and redesign the original Square Battery. With the same overall dimensions we present to you the High Power Square Battery Series! This 18 Amps high power V-Mount battery has a capacity of 300 Watthours. Best suited for e.g. high power LED equipment or any other equipment that fits the needs of high power batteries. Starting at 160Wh with up to 15 Amps.As the battery's cells inside the housing had to be designed in a very compact way - it is even sturdier than the original Square Battery Series. We did lots of test - dropping the battery from one to even six meters, throwing it downstairs and so on, and the battery remains still in its original working condition. The rubber corners provide even more support, bouncing off the ground and absorbing some of the gravitational forces that occur while dropping down. So if you accidentally let the battery drop on set - don't worry! With 4 x D-TAP Outputs (also act as inputs) you can power most of your camera equipment right of one battery without using splitters. The Batteries feature a USB C Output and Input. Specifications Capacity: 20.4Ah 300Wh Voltage: 14.8V Current: 18.0A (max.) D-Tap In- / Outputs: Yes (4x) USB-A Output: 5V/2A, 9V/2A, 12V/1.5A USB-C In/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A (Output 60W max) Dimensions: 126.5(L)mm*97(W)mm*96(H)mm Weight: 1.700g In the box 1 × BP-M300 - 300Wh High Power Battery  

The NANO HUB allows powering different equipment with one hub that you can power from different Inputs. Use 14.8V batteries or D-Tap chargers as input, 14.8V/12V/7.4V/USB-A /USB-C outputs are working at same time.If you use a USB-C adapter as input, 14.8V/12V/7.4V/USB-A outputs working at same time. The USB-C Output has a built in PD fast charge protocol and will give you a power output of max. 60 Watts. You can charge your Apple MacBook Pro or any USB-C compatible devices with the NANO-HUBThe adapter is designed with a 1/4 screw hole, by using a standard hot-shoe, it can be fixed in any position. For further information, please refer to the specifications.Specifications D-Tap Input: 10.0V~16.8V/10A (input by battery or D-tap charger) D-Tap Output: 10.0V~16.8V/10A USB-C PD Input/Output: 5V/3A, 9V/3A, 12V/3A,15V/3A, 20V/3A, 60W USB-A Output: 5V/2A, 9V/2A, 12V/1.5A 12V DC Output: 12V/3A 7.4V DC Output: 7.4V/3A Indicator: blue belt indicator on, NANO-HUB is working Dimensions: 84(L)mm×63(W)mm×23(H)mm Weight: 210g Working Temperature: -20℃～+70 ℃ In the box 1 x NHUB1 - NANO Hub 1 x AN-BL45 - D-Tap Male zu D-Tap Male Kabel 1 x Small Case  

Probably the world's smallest V-Mount battery. And it's not just small - its powerful. With 50Wh up to 8 Amps working current you can get a lot of power out of this little buddy. With one D-Tap output and lots of other USB outputs, so you're never running out of possibilities to power your equipment. The best thing about it is the regulated USB-C output, that can charge your MacBook or any other USB-C compatible device on the go. At the moment there are two capacities available - a 50 Watthours and a 98 Watthours battery, called NANO ONE and NANO-TWO.A LCD shows you the remaining capacity and voltage as well as the voltage of USB and USB-C ports. These sockets are protected from dust and moisture by a rubber lid. There are some dedicated accessories around, like different plates - of course in the compact design of the NANO battery.   Specifications Capacity: 3.4Ah 50Wh Voltage: 14.8V Working Current: 8A (max.) USB-A Output: 5V/2.4A | 9V/2A | 12V/1.5A USB-C In/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.2A Micro USB Input: 5V/3A D-Tap In- / Output: Yes (1x) Dimensions: 100(L)mm*71(W)mm*35(H)mm Max. Current: 8.0A Weight: 310g In the box 1 x NANO ONE - 50Wh Nano V-Mount Battery

Probably the world's smallest V-Mount battery. And it's not just small - its powerful. With 98Wh up to 10 Amps working current you can get a lot of power out of this little buddy. With one D-Tap output and lots of other USB outputs, so you're never running out of possibilities to power your equipment.The best thing about it is the regulated USB-C output, that can charge your MacBook or any other USB-C compatible device on the go.At the moment there are two capacities available - a 50 Watthours and a 98 Watthours battery, called NANO ONE and NANO-TWO.A LCD shows you the remaining capacity and voltage as well as the voltage of USB and USB-C ports. These sockets are protected from dust and moisture by a rubber lid.There are some dedicated accessories around, like different plates - of course in the compact design of the NANO battery. Specifications Capacity:  6.8Ah 98Wh Voltage: 14.8V Working Current: 10A (max.) USB-A Output: 5.0V/2.4A | 9V/2A | 12V/1.5A USB-C In/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.2A Micro USB Input: 5V/3A D-Tap In- / Output: Yes (1x) Dimensions: 101(L)mm*72(W)mm*54.5(H)mm Max. Current: 10A Weight: 520g In the box 1 x NANO TWO - 98Wh Nano V-Mount Battery

This NANO Series battery converter plate lets you use NP-F equipment with NANO V-Mount batteries. The location of the NP-F plate can be adjusted. The Output of the NP-F interface is the same as the battery input. So for 7.4V equipment please have a look at our other converter plate (NANOLNP-C) Specifications Features: Location of NP-F plate can be adjusted, use V-Mount batteries with NP-F powered equipment Input: 10-16.8V NP-F interface Output: Yes (1x) 10-16.8V D-Tap Output: 10-16.8V Compatibility: NP-F equipment with DC 10-16.8V input Dimensions: 88.5(L)mm*62(W)mm*46(H)mm Weight: 123g In the box 1 x NANOLNP - V-Mount Plate  

S-8975 is the replacement battery for SONY NP-F970, compatible with SONY HVR-V1/Z1/Z7, DSR-PD190, HD1000E, etc. S-8975 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder. FEATURES 7.2V nominal voltage Li-ion battery Comparable to SONY L series Display remaining power info on camera viewfinder 75Wh / 10.4Ah capacity 4-level LED power indicator 7.2V Pole-tap DC output Multiple circuit protections

The UPS – Intelligent Li-Ion V-Mount battery provides your equipment with continuous power, as it acts as a V-Mount battery, on which you also can put another battery on. So you can “hot-swap” on any equipment without risking it to loose power. First the attached battery is used and then if it reaches a critical point – power switches back to the Intelligent Battery instantly.The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a maximum loss in sub zero temperatures of half the capacity.There is also a 5-Level power indicator. The first level lights up as the back battery replacement light at the same time.Specifications Capacity: 6.6Ah 100Wh Voltage: 14.8V Current: 10A (max.) D-Tap In- / Output: Yes (1x) USB-A Output: 5V/2A DC 2.1 Pin Out-/ Input: 10.0-16.8V Dimensions: 152(L)mm×100(W)mm×63(H)mm Weight: 850g In the box 1 × BP-F100U - 100Wh Intelligent Battery