"C" stands for compact - and that is what CLR2 is all about. Wireless video with no external antennas, it is small and pracitcal. Its transmission range of 300m makes it ideal for film sets and similar production environments. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 300ft/ 1000m LOS Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 13,1 x 7,2 x 2,2 cm Dimensions Receiver (with Antennas): 14,1 x 10,0 x 2,2 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510   What's In The Box? 1 x Dwarf CLR2.MKII Transmitter 3x Flexible Sword Antennas 1 x Dwarf CLR2.MKII Receiver with Antenna cap 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case   Please note these units are only allowed for indoor-use.

A more powerful and very compact alternative to the stub antennas. What's In The Box? 2x Fix Mushroom Antennas

Circular polarization - when proper alignment of your device is hard to archieve. Very good option for gimbal operation or drone use (indoor). What's In The Box? 2x Flexible Clover Leaf  

Dwarfs standard antennas; light, flexible, powerful. Make sure the flat surface of the antennas is facing the RX direction. What's In The Box? #DC.X.0020 2x Fix Mushroom Antennas   What's In The Box? #DC.X.0023 5x Fix Mushroom Antennas

Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! Depending on which transmitter you are using, the X.LINK.L1 can receive signals from between 500 and 1200 meters away.   Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI Outputs: 3G-SDI, HDMI V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1200m LOS up to 8200feet / 2500m with RX Patch Antenna RE-2 Video Inputs: Wireless Video Outputs: 2x 3G-SDI, 1x HDMI Type-A SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Receiver (without Antennas): 14,8 x 10,0 x 2,0 cm Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf ULR1.MKII Receiver V-Mount 6 x RX Omnidirectional Rod Antannas 1x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20  

A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0033 2x Mini Mushroom Antennas  What's In The Box? #DC.X.0035 5x Mini Mushroom Antennas

A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0034 2x RX Omnidirectional Rod Antennas  What's In The Box? #DC.X.0015 5x RX Omnidirectional Rod Antennas

Extend your receiver range up to 2500m / 8.202ft What's In The Box? 1x RE Antenna 5x Antenna cable

Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! ​Depending on which transmitter you are using, the X.LINK.S1 can receive signals from up to 500 meters away. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI Outputs: 3G-SDI, HDMI Receiver with Antenna Cap Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1000m LOS Video Inputs: Wireless Video Outputs: 2x 3G-SDI, 1x HDMI Type-A SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC Power Consuption: RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Receiver 14,8 x 10,0 x 2,2 cm Weight: Receiver: 376,6g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf Link S.MKII Receiver 1x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20  

The DC-Link- ULR1 is a high-performance WHDI video transmission system which transmits uncompressed video and audio signals up to 1200m with low latency (1 ms delay). Due to the conscious decision not to implement DFS (Dynamic Frequency Selection), which is compulsory for outdoor use, the device has a longer range, greater stability and better usability than comparable systems. The transmitter and receiver both have 3G-SDI and HDMI connectors. When a video source is attached, the transmitter automatically selects the input (SDI is prioritised). The receiver’s 3G-SDI and HDMI outputs can be used simultaneously. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1200m LOS up to 8200feet / 2500m with RX Patch Antenna RE-2 Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 14,4 x 7,5 x 2,1 cm Dimensions Receiver (without Antennas): 14,8 x 7,5 x 2,1 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf ULR1.MKII Transmitter 3 x Flexible Sword Antennas 1 x Dwarf ULR1.MKII Receiver V-Mount 6 x RX Omnidirectional Rod Antannas 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case  Please note these units are only allowed for indoor-use.