Filter
15mm Maxi Rod Light
Meet the 15mm Maxi Rod Light, a product that resulted from a collaboration with a member of our community. This small rod light was designed specifically for cinema-like environments, where using 15mm style rods is standard. The housing is made from aluminum, allowing the user a sturdy place to mount a lens motor or other accessories. It offers 3 different, dimmable lighting options in Red, UV, and White LED, controlled by a joystick for a tactile way to scroll through the settings. This light is powered by a 2-pin locking connector and comes in three sizes, you can choose between 4", 6", or 8".  This light was designed to shine a light on your lens without having to maneuver a flashlight or other awkward light source. Additionally, you can attach this light to a monitor to illuminate your hand unit or other tools. #A00747: 4" / 10cm Maxi Rod Light 15mm#A00390: 6" / 15cm Maxi Rod Light 15mm#A00749: 8" / 20 cm Maxi Rod Light 15mm Specifications: 4": Weight: 18.87 g (0.04 lbs)| Dimensions: 99.6 x 14 x 14 mm (3.48 x 0.55 x 0.55")6": Weight: 28.3 g (0.06 lbs) | Dimensions: 151 x 14 x 14 mm (5.98 x 0.55 x 0.55")8": Weight: 35.42 g (0.08 lbs) | Dimensions: 202 x 14 x 14 mm (7.96 x 0.55 x 0.55") Warning: To prevent potential eye injury, avoid direct exposure to the light beam. Do not stare into the light source.

€1.00*
Cine Mag Ties (Pack of 5) - various Colors available
Eliminate threadbare Velcro strips and breakable cable clips from your workflow with Cine Mag Ties—durable, color-coded, quick-attach/release, silicon-molded magnet cable ties that give you an innovative, intuitive way to streamline your cable management, identify your runs, and personalize your setup. Available in 105mm and 175mm lengths with an integrated loop for attachment via a 1/4”-20 camera screw or directly to the cable itself to prevent misplacement. In addition, the silicon is stretchable allowing it to fit over cable connectors making sure they always travel with your cables on or off your setups. Select from 13 colors: yellow, red, green, blue, orange, teal, purple, pink, black, neon blue, neon green, neon orange, and neon pink.Specifications:Cine Mag Ties 105mm: Weight: 21.68 g  | Dimensions: 10,5 x 1,81 x 2,15 cm Cine Mag Ties 175mm: Weight: 445.9 g  | Dimensions: 17,5 x 1,81 x 2,15 cm A00686: 175mm, Neon Orange/PinkA00687: 175mm, OrangeA00688: 175mm, BlackA00689: 175mm, RedA00690: 175mm, BlueA00691: 175mm, GreenA00692: 175mm, YellowA00693: 175mm, PinkA00694: 175mm, PurpleA00695: 175mm, Neon BlueA00696: 175mm, TealA00697: 175mm, Neon OrangeA00698: 175mm, Neon GreenA00699: 105mm, RedA00700: 105mm, BlueA00701: 105mm, GreenA00702: 105mm, YellowA00703: 105mm, PinkA00704: 105mm, PurpleA00705: 105mm, Neon BlueA00706: 105mm, TealA00707: 105mm, Neon Orange/PinkA00708: 105mm, OrangeA00709: 105mm, Neon OrangeA00710: 105mm, Neon GreenA00711: 105mm, Black

€1.00*
Hudson Spider Flop Daddy
Discover Flop Daddy™. This game-changing innovation instantly transforms any 4x4 floppy into a relaxing glare-free screening room, so you can focus on what really matters.Featuring a white outer layer to reflect the heat and a black interior to minimise monitor glare. Flop Daddy is ideal for everyone as: DOP/DP Camera Operator AC Director/AD Script DIT VAO Lighting Grip Make-up Wardrobe FX Stylist Agency Stunts ...   FEATURES Slips on to any 4x4 floppy Waterproof material 2 roll up sides with mesh window inner layer Travels in a sleek shoulder bag White outside - black inside - dual layer Nylon. Grab some Sand Noodles™ to slide into the sides of your Flop Daddy™ (or KUPO Floopy) if the wind picks up.    

€1.00*
IN2CORE MetaCoder - Wireless camera metadata solved
All on-set video professionals know that wireless transmitters strip out metadata from the camera output. Digital cinema cameras use ancillary space of the SDI signal to output timecode, record flag, filename and other valuable information. Unfortunately, wireless devices will not transport this part of the SDI signal. MetaCoder solves this problem by processing metadata in a way that preserves it regardless of the wireless sender. Just place the MetaCoder in the chain between the camera and the transmitter and you’re done. QTAKE will now be able to read the metadata, just like if it was connected to the camera using the SDI cable.      FEATURES Zero latency metadata processing Camera model auto-detection Support for ARRI and SONY cameras (RED support coming soon) SD/HD/3G-SDI input and outputs Loop-through Optional network connection to camera OLED status display Rotary push knob menu control Internal battery to allow hot-swapping power cables Future-proof design upgradable by firmware Fanless design for entirely silent operation    Technical Specs Video Input: 3G-SDI Video Outputs: - 3G-SDI with processed metadata- 3G-SDI loop-through Data ports: - Ethernet- USB-C Power:- 2-pin Lemo connector- Internal Battery  In the Box MetaCoder Multi-plug adapter WiFi antenna SDI - SDI cable Lemo - Lemo cable DTap - Lemo cable  

€1.00*
IN2CORE QOD+ - The ultimate QTAKE output device
QOD+ provides superior hardware solution for GPU driven video output. It converts DisplayPort output to four SDI outputs supporting all standard frame-rates, up to 60fps. QOD+ is controlled directly by QTAKE software to provide smooth, jitter-free video output with embedded audio and timecode. This unique custom-made device is compatible with every version of QTAKE, from HDx1 up to HDx4 or with two QOD+ devices up to HDx8/4Kx2    FEATURES 4 independent SDI outputs Very low latency of just 1 frame* SDI embedded audio SDI embedded timecode Thunderbolt compatible DisplayPort input Analog audio input Genlock input Support for HD-SDI and 3G-SDI formats Interlaced, Progressive or PsF output 4K output support up to 60fps USB control directly from QTAKE software DIP switch control for standalone operation Single, compact, DC powered unit Future-proof design upgradable by firmware Fanless design for entirely silent operation    Technical Specs Video Input: DisplayPort with embedded audio Reference Input: HD Tri-level sync Input formats: HDx2 3840 x 1080, HDx3 1920 x 3240, HDx4 3840 x 2160 Video Output: 4x 3G-SDI with embedded audio, DisplayPort with embedded audio Audio Input: DisplayPort embedded audio, 3.5mm stereo analog audio Dimensions: 11,7 x 16,8 x 4,3cm (4.6” x 6.6” x 1.7”), Weight 780g Power: Universal Power Supply (included)100-240V, 50/60Hz AC input, 12V, 24W max DC output    In the Box Screenport SDI+ Multi-plug adapter Two dual-band WiFi antennas USB-C to USB-C cable USB-C to Lightning cable  

€1.00*
IN2CORE Screenport SDI Pro - Camera to cloud with metadata
Shooting in a remote location often requires live stream or proxy media sharing to provide efficient control over the production process. ScreenPort SDI Pro delivers both and much more. Using industry-standard power connectors and rugged metal enclosure it was designed to be mounted on the camera to capture SDI video, audio and metadata and stream it over the local network to multiple clients in its standalone mode. When connected to iOS device ScreenPort SDI Pro offers ultra-low latency streaming over the internet and proxy media upload to QTAKE Cloud to make the content instantly available to main unit or remote collaborators.   FEATURES Streaming to multiple clients SDI auto-record SDI metadata capture Access Point mode Rugged metal case Powered by camera Camera-to-cloud ready    Technical Specs Video Input / Output: 3G-SDI / 3G-SDI loop-through Audio Input: 3.5 mm unbalanced stereo / balanced mono Data ports: WiFi (2.4/5.0 GHz, 802.11 a/b/g/n/ac) /Ethernet / USB-C Power:USB-C Power input 15W (5VDC/3A)LEMO Power input 18W (6 – 18 VDC) Dimensions: 11,1 x 10,8 x 2,3 cm (4,37″ x 4,25″ x 0,91″) Weight: 240 g (0.53 lb)    In the Box Screenport SDI Pro Multi-plug adapter Two dual-band WiFi antennas Lemo - Lemo cable Dtap - Lemo cable SDI - SDI cable USB-C to USB-C cable USB-C to Lightning cable  

€1.00*
IN2CORE Screenport SDI+ - Turn your iPad into professional monitor & recorder
iOS devices feature amazing displays that often exceed the quality of dedicated portable and on-board SDI monitors. In addition to color accuracy, wide gamut, and slim form factor, they offer responsive touchscreen interface and incredible computing power. But they lack video input. ScreenPort SDI+ adds video input to iPad, iPhone or Mac and turns it into professional 3G-SDI monitor capable of capturing up to 1080p60 video feed with your personal portable device. ScreenPort app provides video controls, analysis and recording tools unmatched by most professional monitors.     FEATURES Video, audio, metadata monitoring & recording SDI embedded or analog audio capture Auto-recording using camera SDI flags Streaming to remote monitors over internet Compatible with QTAKE applications Battery powered operation Bus-powered operation when using Mac Wired and wireless connection to host devices Preloaded and custom 3D LUT processing Predefined and custom frame-lines Waveform, vectorscope and histogram analysis Focus peaking and customizable false color Future-proof design upgradable by firmware    Technical Specs Video Input / Output: 3G-SDI / 3G-SDI loop-through Audio Input: 3.5 mm unbalanced stereo / balanced mono Data ports: WiFi (2.4/5.0 GHz, 802.11 a/b/g/n/ac) / Ethernet / USB-C Power: USB-C power adapter / External batteries Dimensions: 115 x 85 x 30 mm (4.53″ x 3.35″ x 1.18″) Weight: 160 g (0.35 lb)    In the Box Screenport SDI+ Multi-plug adapter Two dual-band WiFi antennas USB-C to USB-C cable USB-C to Lightning cable  

€1.00*
Inovativ 75mm Ball Plate
  Inovativ 75mm Camera Mount Ball Plate Camera Mount Plates are designed to integrate tripod heads with our Camera Mount System, providing a convenient and reliable camera mounting solution. These plates are precision-machined from durable 6061 T6 Aluminum and come complete with all the necessary mounting hardware for effortless installation. Camera Mount System is sold separately. The Camera Mount System offers a lightweight yet robust solution for mounting cameras to a workstation. The system utilizes a 1.75 in. Center Mast for attaching to the workstation, allowing for flexible camera placement. Camera Mount System for Voyager/ Apollo allows for camera positioning directly over the top shelf or off to the side while the Camera Mount System for AXIS allows for positioning at any point 360˚ degrees around the AXIS Stand. The 1.75 in. Center Mast also allows for vertical height adjustability along the length of the mast (34 in.). With its versatile design, the Camera Mount System can accept multiple different Horseshoes and Camera Plates, offering support for various camera configurations. Camera Mount Plates are sold separately.   KEY FEATURES Machined from 6061 T6 aluminium Anodised INOVATIV orange 75mm ball mount Includes all additional mounting hardware    

€1.00*
Inovativ Cable Management Post Clamps
Cable Management Post Clamps provide a tool-less solution for organizing cables on round posts of various diameters. The Post Clamp features an open channel that accommodates multiple cables, creating a streamlined group of cables for simplified management and security. Available in 1.50 in, 1.75 in, and a 3-Clamp Kit for AXIS Stands, these clamps offer versatile solutions for any setup. ComponentsCable Management Post Clamp Kit For AXIS Stands The Cable Management Post Clamp Kit For AXIS Stands, includes 3 Cable Management Post Clamps, one or each stage of the AXIS Stand (1.385, 1.585, 1.785).1.50 Cable Management Post ClampThe 1.50 Cable Management Post Clamp is compatible with workstation leg posts as well as the posts included in the Monitor Arm Systems.1.75 Cable Management Post ClampThe 1.75 Cable Management Post Clamp is compatible with various mast-based INOVATIV accessories like the Camera Mount System, Tripod System, Steadicam System, and Mast Riser System.   KEY FEATURES• Tool-less Design• Streamlined Cable Management• Durable 6061 T6 Aluminum Construction

€1.00*
Inovativ Insight Monitor Mounting System for Deploy
  Inovativ Insight Monitor Mounting System for DeployThe Insight is a monitor mounting system that integrates perfectly with all INOVATIV workstations. It is designed to hold multiple monitors at a time, and offers a wide variety of mounting options. The dual cross tubes deliver stability and strength, maximizing the systems ability to hold multiple monitors and withstand the demands of set life.  The Insight System packs up easily for transportation. Designed and Manufactured in California, USA and includes a 5 year warranty.The Insight System is designed to work with INOVATIV’s proprietary Pro Ultra Monitor Arms.  Our Pro Ultra Monitor Arms allow one to adjust the monitor to the ideal height for your viewing while standing or sitting.  Capable of mounting any monitor with a VESA mounting pattern, the Pro Ultra Arm has 10 In. of extendable reach along with 60 points of adjustable swing.  The fully lockable articulator arm prevents monitor swinging or rattling when moving your cart during filming or during transportation.Kit Includes Pro Ultra Monitor Arms (2 or 3) Crossbars Pro Vesa Plate Vesa Pin mounting hardware Consider adding an Insight Baby Pin Attachment onto each Pro Ultra Arm.  The Insight Baby Pin Attachment is for attaching wireless receivers, wireless transmitters, antennas and other accessories.   Features Allows you to fit 2 monitors in landscape positions 360° Monitor Rotation:  Allows landscape and portrait viewing (hard lock every 90 degrees). Height Adjustable: Via the Insight Riser Tubes and Pro Ultra Arm Vesa Plate. Locking Pan: Rosette mounts allow 60 points of locked panning positions. Screen Tilt: Adjustable screen tilt 90° down and 90° up (limited by the size of the monitor). Monitor Extension: 10 inches of extendable reach. Max Weight Capacity: Supports monitors weighing up to 40 lbs. Vesa Plate: Combines 75mm and 100mm vesa plate into one plate. Adjust your Vesa Plate height in 5 different positions located on the Vesa Plate Pin (each adjustment is 1 inch apart). Multiple ⅜ threaded holes on Insight Mast Assembly’s and System Brackets for mounting antennas and other accessories Extremely strong, stable and rigid design. Packs easily for transportation. Precision machined “Dry” bearings allow for smooth movement along cross tubes. Constructed of premium 5052 and 6061 aluminum and stainless steel hardware. Anodized Black and Orange  –  Type II and III anodizing on all uprights and machined parts. Durable finish and seal for long term use and smooth operation. Designed and Manufactured in California, USA. 5 Year Limited Manufacturer’s Warranty.   Insight Monitor Mounting System (without Pro Ultra Arm or Insight’s Baby Pin Attachment) Weight: 16.5 – 18.5 lb Lowest position from ground: 58.5 inches (to center of monitor) Highest position from ground: 66.5 inches (to center of monitor) Max Weight Capacity: Supports monitors weighing up to 40 lbs. Vesa Plate: Compatible with 75 mm and 100mm. Adjust your Vesa Plate height in 5 different positions. Integrates easily with Deploy workstations.   Pro Ultra Monitor Arm · Product Weight: 4 lbs. · Max Weight Capacity: Supports monitors weighing up to 40 lbs. · Material: Machined 6061 Aluminum and anodized black · Product Dimensions Collapsed: 8.4 In. L x 4.75 In. W x 6 In. H · Product Dimensions Extended: 12 In. L x 5.5 In. W x 6 In. H  

€1.00*
Inovativ Monitor Handle (VESA Compliant)
  Inovativ Monitor Handle (VESA Compliant)The INOVATIV Monitor Handle is a VESA compliant carrying solution for monitors with VESA hole patterns of either 100mm x 100mm or 75mm x 75mm - including production monitors, computer monitors, and more. The handle features multiple 3/8″-16 and 1/4″-20 mounting points which allow users to easily add accessories such as wireless video receivers or web cameras, further streamlining and consolidating their monitor workflow.KEY FEATURES• Compatible with 100 x 100mm or 75 x 75mm Vesa mounting holes• Supports the monitors of all sizes and weights• Multiple 3/8″-16 and 1/4″-20 mounting holes for attaching accessories• Simple to install• Premium grade materials and craftsmanship• Constructed of 6061 T6 aluminum, stainless steel hardware throughout, corrosion resistantSPECIFICATIONS• SKU: 501-630• Product Dimensions: 7.00″ L 4.50″ W 1.50″ H• Product Weight (Handle Only): 0.4 lb., 0.6 oz, (0.18 kg)• Product Weight (Handle + Adapter Plate): 0.6 lb. (0.27 kg)• Load Capacity: 55 lb.COMPATIBLE ACCESSORIES• QR System 501-610• 3.5 in. Baby Pin 555-305• Pro Monitor Mount 501-600• Workstation Monitor Arm System (VESA Compliant) 501-110• Desktop Monitor Arm System (VESA Compliant) 501-120  

€1.00*
INOVATIV Pro Monitor Mount
INOVATIV’s Pro Monitor Mount fits most monitors and connects easily to industry standard ⅝” pins, commonly known as “”Baby Pins””. Its compact, lightweight design makes it easy to pack for travel and take it where you need it most. It’s machined aluminum design provides a solid connection to our AXIS Stand, C-Stand, rolling stand, or anything with a ⅝” baby pin. It’s equipped with our 100×100 VESA Plate which fits beautifully on most monitors and gives you the ability to freely rotate the monitor or easily lock it in a Portrait or Landscape position. Additionally, the Pro Monitor Mount has an internal rosette design that keeps your monitor locked in its tilted position, even with heavier monitors. That said, the Pro Monitor Mount has a max weight capacity of 40lb and measures in at 4.50″” W x 5.30″” L x 5.03″” H. Need to mount wireless receivers, transmitters, antennas, or other accessories that connect to a baby pin? A unique feature of the Pro Monitor Mount is that it has a ⅜-16 threaded hole located on the top surface, providing an additional position to mount an extra threaded baby pin. The Pro Monitor Mount is manufactured from premium 6061 aluminum coated with INOVATIV’s Triple Anodize Mil-Spec process, and uses stainless steel hardware.   The Pro Monitor Mount is a new INOVATIV design that connects easily to industry standard ⅝” pins, commonly known as Baby Pins. Its compact, lightweight design makes it easy to pack for travel and take it where you need it most.  It’s equipped with our standard 100×100 VESA Plate which fits beautifully on most monitors and gives you the ability to freely rotate the monitor or easily lock it in a vertical or horizontal position. Additionally, the Pro Monitor Mount has an internal rosette design that keeps your monitor locked in its tilted position.  Have a heavier monitor? The rosette design will keep your monitor in its place no matter what environment you’re in. Lastly, a unique feature of the Pro Monitor Arm is a ⅜-16 threaded hole located on top of the Pro Monitor Mount providing an additional position to mount an extra threaded baby pin. Manufactured using premium 6061 aluminum and stainless steel hardware.

€1.00*
Inovativ Twin Two-Stage Risers With 2 Pro Monitor Mounts
  Inovativ Twin Two-Stage Risers With 2 Pro Monitor MountsWith seamless integration, the Two-Stage Risers and Pro Monitor Mounts allow you to set up your mobile Deploy or Apollo Workstation efficiently, allowing for an easy mount and storage of your monitors.With seamless integration, the Two-Stage Risers and Pro Monitor Mounts allow you to set up your mobile Deploy or Apollo Workstation efficiently, allowing for an easy build and storage of your monitors.This kit includes dual Two-Stage Risers and two Pro Monitor Mounts. The Two-Stage Risers seamlessly integrate into the receiver tubes located on the back side of the Deploy, and the Corner Plugs in The Apollo. Two Stage Risers have an anodized orange aluminum coupler and the risers themselves are powder-coated black. The length of Stage Risers are 50 In. when fully extended. INOVATIV’s Pro Monitor Mounts connect easily to industry standard 5/8 In. Baby Pin. Their compact, light-weight design makes it easy to pack for travel and take it where you need it most. The Pro Monitor Mounts are equipped with our standard 100 x 100 VESA Plate which fits on most monitors and gives the ability to freely rotate the monitor and easily lock in a vertical position. The internal rosette design keeps your monitor locked in your preferred tilted position. For heavier monitors, the rosette design will keep your monitor in place even when rolling the workstation on a bumpy surface. Need to mount an additional threaded baby pin? A unique feature of the Pro Monitor Arm is a 3/8 In. -16 threaded hole located on top of the Pro Monitor Mount.  

€1.00*
Inovativ Workstation Monitor Arm System (VESA Compliant)
Inovativ Workstation Monitor Arm System (VESA Compliant) is a locking monitor arm system compatible with our full range of cart workstations via both 100 x 100mm and 75 x 75mm VESA hole patterns on monitors up to 55 lbs.The Workstation Monitor Arm System attaches to the upright posts of any INOVATIV cart workstation without the need for tools. The Locking Monitor Arm features two locking rosette joints for secure monitor positioning designed to prevent loosening over time. The included cable management components allow users to safely organize cables and eliminate hazards.The Monitor Arm can easily be positioned to find the perfect viewing angle. Users can adjust the height of the monitor along the length of the vertical post. Or, pivot on the post for side-to-side adjustment. Locking rosette joints provide two points of horizontal articulation for moving the monitor closer or relocating it out of the way. The VESA compliant monitor plate provides smooth 360° rotation as well as pan and tilt adjustability, with the option to lock the monitor in either landscape or portrait orientation. The Workstation Monitor Arm System (VESA Compliant) replaces our previous monitor arm solutions, the BOA and Sidewinder.Key Features● Payload Capacity of 55 lbs.● Locking Pan and Tilt● Locking Rosette Joints for Security● Locking Landscape and Portrait● Height Adjustable● 360 Degree Free Rotation● Integrated Cable ManagementIn The Box● (1) Locking Monitor Arm (VESA Compliant)● (1) 100 x 100mm / 75mm x 75mm VESA Compliant Monitor Plate● (1) 1.5 in. Workstation Monitor Post● (2) Workstation Monitor Post Clamps● (2) Cable Management Hooks● (1) 1.5 in. Cable Management Post ClampSpecifications● Payload Capacity: 55 lbs.● Maximum Reach: 16.5 in.● Arm Dimensions, Fully Extended with VESA Plate Attached: 18.50 in. L x 4.50 in. W x 5.25 in. H● Arm Dimensions, Collapsed with VESA Plate Attached: 10.75 in. L x 6.75 in. W x 5.25 in. H● Arm Weight: 5.8 lbs. (2.63 kg)● Post Diameter: 1.5 in. (38 mm)● Post Length: 31.5 in. (800 mm)● System Dimensions (Includes Arm, Post, Clamps): 18.50 in. L x 4.50 in. W x 31.50 in. H● System Weight (Includes Arm, Post, Clamps): 11 lbs. (4.9 kg)● Durable 6061 T6 Aluminum Construction● Corrosion Resistant Stainless Steel HardwareRECOMMENDED PRODUCTS● QR System | 501-610● Monitor Handle | 501-630

€1.00*
KUPO 48"x48" Top Hinge Floopy Full Frame - Black
The Kupo kt-4848tf floppy flag 48"x48"(20 x 120cm) withtop hinge is made of opaque fabric witha rigid frame. It measures 48"x48"(120 x 120 cm) and can be opened to a size of 48"x96"(120 x 240 cm) by detaching the velcro. Features a velcro sewn on the back of flag that makes it firmly stick on the stand . A rolled-up edge in one end of flag allows you to put rod or tube as weight to keep the flag straight. FEATURES Made of Opaque Fabric with Rigid Frame Measures 48"x48" / 120x120cm Can be opened to Size 48"x96"´/ 120x240cm Rolled-up edge in one edge of the flag allows putting a rod or tube as weight to keep the flap straigt TECH SPECS Color: Black Material: 600D Cordura Nylon Frame Material: Steel Weight: 5.7 kg Size: 48" x 48", 48" x 96" (Unfold Rear) / 120cm x 120cm , 120cm x 240cm (by detaching the Velcro) Rod Diameter: 10mm  

€1.00*
Small HD Sun Hood for 13" Production Monitors
FEATURES Fits 1300 series monitors 3-sided glare protection Secure mounting solution utilizing the built-in 1/4 20 mounting holes No tools, velcro or tape required

€1.00*
SmallHD 1/4-20 Cheese Stick for SmallHD 4K Monitors
Anodizes Aluminum, 1/4-20 mounting points, easy swappable. FEATURES Anodized aluminum cheese stick Mounts on top or side of the 4K monitors (Vision 17, OLED 22, Cine 24, Vision 24) Adds several mounting points for various 1/4" accessories Contains 1pc   Also available as Combo Cheese Stick or Blank Cheese Stick

€1.00*
SmallHD 17" Sunhood for Vision 17
17" Sunhood for Vision 17 Monitors FEATURES 3- or 4-sided fabric reinforced sunhood Easy to attached Quickly convert from 3-sided to 4-sided with access snaps Attaches to screwholes in Cheese Sticks on top and side of the 4K monitor For Vision 17 monitors  

€1.00*
SmallHD 22" Sunhood for OLED 22
22" Sunhood for OLED 22 Monitors FEATURES 3- or 4-sided fabric reinforced sunhood Easy to attached Quickly convert from 3-sided to 4-sided with access snaps Attaches to screwholes in Cheese Sticks on top and side of the 4K monitor For OLED 22 monitors  

€1.00*
SmallHD 24" Sunhood for Cine 24 and Vision 24
24" Sunhood for Cine 24 and Vision 24 Monitors FEATURES 3- or 4-sided fabric reinforced sunhood Easy to attached Quickly convert from 3-sided to 4-sided with access snaps Attaches to screwholes in Cheese Sticks on top and side of the 4K monitor For Cine 24" and Vision 24" monitors  

€1.00*
SmallHD 3/8 & 1/4-20 Combined Cheese Stick for SmallHD 4K Monitors
Anodizes Aluminum, 1/4-20 & 3/8 mounting points, easy swappable. FEATURES Anodized aluminum cheese stick Mounts on top or side of the 4K monitors (Vision 17, OLED 22, Cine 24, Vision 24) Adds several mounting points for various 1/4" & 3/8" accessories Contains 1pc   Also available as 1/4-20 Cheese Stick or Blank Cheese Stick.

€1.00*
SmallHD 702 Touch/Cine7 UltraClear Screen Protector
Flexible Clear Screen Protector.Add scratch resistance and polarization to your SmallHD 702 Touch or Cine 7 monitor.  

€1.00*
SmallHD Adjustable neck strap for SmallHD monitors with handles
Comfortable neck support for directors and clients.  

€1.00*
SmallHD Anti Reflective NU-Shield Stick On Screen Protector for 503UB Monitor
NuShield DayVue Professional, Flexible, Anti-Reflective Scratch Protector - Clear. Compatible with 503 Ultra Bright monitor. Does NOT provide IMPACT protection.  

€1.00*