Teradek Bolt 4K Transmitter Monitor Module 750ft for Smart7 Series

  Teradek Bolt 6 Monitor Module 750ft RX Wireless Video ReceiverThe Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds.The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set.Key features of the Bolt 6 RX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The Bolt 6 RX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 Receiver Monitor Module offers two line-of-sight options: 750 ft., and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates.   Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay   What's In The Box?   1 x Bolt 6 Monitor Module 750 RX Gold Mount or V-Mount 5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Screw Socket Head Black 1/4-20 x 3/8" length 2 x Screw Socket Head Low Profile Black Oxide M3 x 20mm 1 x Hex L key 2mm size 3-3/8" length 1 x Hex L key 3/16" x 2 13/16" length 1 x HDMI Adapter Bolt 4K RX Monitor Module  SmallHD Smart 7 Monitor (INDIE7, 702Touch, Cine7) is required and not included.

  Teradek Bolt 6 Monitor Module 1500ft RX Wireless Video ReceiverThe Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds.The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set.Key features of the Bolt 6 RX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The Bolt 6 RX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 Receiver Monitor Module offers two line-of-sight options: 750 ft., and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Technical Specs Range: 1500ft/ 457m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay   What's In The Box? 1 x Bolt 6 Monitor Module 1500 RX Gold Mount or V-Mount 5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Screw Socket Head Black 1/4-20 x 3/8" length 2 x Screw Socket Head Low Profile Black Oxide M3 x 20mm 1 x Hex L key 2mm size 3-3/8" length 1 x Hex L key 3/16" x 2 13/16" length 1 x HDMI Adapter Bolt 4K RX Monitor Module    SmallHD Smart 7 Monitor (INDIE7, 702Touch, Cine7) is required and not included.

Bolt 4K MAX is the most reliable, highest performance wireless video system we’ve ever created. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.FEATURES Video: Up to 4K60FPS with 12G-SDI and HDMI Range: up to 3000ft LOS and 5000ft/ 1524m with Panel Antenna Broadcast Mode: connect unlimited receivers simultaneously a/o increase your wireless video range up to 5.000 feet and beyond with ARRAY 4K Panel Antenna. Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Multicast: Up to 6 RXs or unlimited in Broadcast Mode (only with broadcast mode RX possible) Compatibility:  Bolt 4K 750, Bolt 4K 1500, Bolt 4K LT 750, Bolt 4K LT 1500, Monitor Module 750 TX and RX, Monitor Module 1500 TX and RX,  In the Box: 1 x Bolt 4K MAX TX with V-Mount 1 x Bolt 4K MAX RX with V-Mount 1 x Antenna Array for Bolt 4K 4.9-7.3GHz V-Mount 1 x 5in Wooden Camera Ultra Arm (1/4-20 & 3/8-16) 1 x Bolt 4K TX Mounting Base Bracket 1 x 3/8in Lightstand Adapter 1 x Hot Shoe Adapter 2 x 18in Thin HDMI cable 2 x 18in Locking 2pin to P-tap cable 1 x 3ft USB Type A to USB Type B (Micro) cable 2 x 18in 12G SDI cable 1 x Large Custom Case for Bolt 4K 1 x 6ft Locking 2pin to AC Power adapter 9 x Standard Antennas 1 x 18in Locking 2pin to Locking 2pin cable  

Bolt 4K LT is the newest entry-level wireless video system to be introduced to the Bolt 4K family. Bolt 4K LT devices are fully compatible with all other Bolt 4K devices, are capable of transmitting 10-bit, 4:2:2 HDR video at a range of up to 750 feet, 1500 feet or 5000 feet (with Array Antenna) line-of-sight over the unlicensed 5GHz band, and can multicast 6 receivers simultaneously. For HDR workflow, Bolt 4K LT supports the HDR-10, PQ and HLG standard and can transport extended camera metadata, timecode and record triggers over the wireless link.Real-Time 4K Wireless Video via HDMITransmit uncompressed video in 1080p and 2160p at 30FPS with less than 1ms of delay. Up to 1500 ft. of range.Can transmit wireless video to all ranges of Bolt 4K devices - limited by shortest range device !True HDR ColorBolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.Rock-Solid ReliabilityBolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.Universal CompatibilityEach transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.Inputs/OutputsTransmitter: 1x 3G-SDI and 1x looping output & 1x HDMI 2.0Receiver: 1x 3G-SDI, 1x HDMI 2.0Camera MetadataSend start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.Bolt App for iOSRemotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand. FEATURES Video: Up to 4K30FPS (HDMI) Range: 1500ft/ 458m Inputs: 3G-SDI, HDMI 2.0 Outputs: 3G-SDI, HDMI 2.0 Multicast: Up to 6 RXs Compatibility: Bolt 4K 750, Bolt 4K 1500, Bolt MAX, Bolt 4K LT 750, Bolt 4K LT 1500, SmallHD Cine7 Bolt 4K Monitor Module, Technical Specs Range: 1500ft/ 458m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 2x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz    

The Bolt 4K Monitor Module 1500 TX zero-delay wireless video transmitter supports video signals up to 4Kp30 via HDMI with 1,500 feet (456m) of range. Designed for seamless integration with the SmallHD Smart 7 Monitor Series, which includes Cine 7, Indie 7, and 702 Touch. It supports 4K and HDR with faster reconnection times and easy setup with the Bolt App (iOS/Android). Wireless camera control for select cameras is available with a SmallHD license (sold separately), unlocking remote access to run/stop, frame rate, ISO, shutter angle, white balance, internal ND filter, playback clips, and more.  NOTE: Beta SmallHD monitor firmware 4.7.0 or later required for wireless camera control functionality Integrated Hardware Addition to SmallHD Smart 7 Touchscreen MonitorsThe TX Module easily connects to the back of Cine 7 Smart Monitors for a lighter, more streamlined setup. Wireless Camera Control Control your camera from up to 1,500 feet away by pairing your Bolt 4K Monitor Module 1500 TX to a Monitor Module RX connected to a SmallHD Smart 7 Monitor.  Compatible SmallHD Smart 7 Monitors include Cine 7, Indie 7, and 702 Touch. Wireless Camera Control for ARRI Mini, Mini LF, and Amira is now available. Due to the ethernet requirement for ARRI Camera Control, the TX Module must be used with a Cine 7 that has an ARRI Camera Control license installed. The RX Module can be attached to any other Smart 7 monitor. Please ensure your Smart 7 Monitor’s firmware is up to date. To set up wireless camera control for ARRI, the following hardware and software are required: Cine 7 monitor + Bolt 4K Monitor Module TX connected to the camera with ARRI license installed (If you are using two Cine 7 monitors, you can have the license installed on either one) Any Smart 7 monitor + Bolt 4K Monitor Module RX on the remote monitor for wireless control To set up wireless camera control for KOMODO or DSMC2 (coming later this summer), the following hardware and software are required: Any Smart 7 Monitor + Bolt 4K Monitor Module TX connected to the camera with any necessary camera control cables Any Smart 7 Monitor + Bolt 4K Monitor Module RX on the remote monitor. Camera control for KOMODO or DSMC2 installed on either one of the Smart 7 Monitors Zero-Delay 4K Wireless VideoTransmit video up to 4Kp30 at a line-of-sight distance of up to 1,500ft (228m) with no image delay (>0.001sec). (Receiver sold separately.) Transmitter:Input: 1x HDMI 2.0 (up to 4Kp30) True HDRSupports 10-bit 4:2:2 color gamut allowing for wireless on-set HDR monitoring. Improved Wireless PerformanceReliable signal transmission and reception over 13x 40MHz frequencies. Upgraded hardware provides less signal breakup, faster reconnection times, automatic signal-quality switching, and a more robust frequency-hopping algorithm. Send Signal to Unlimited ReceiversSupports Broadcast Mode, meaning unlimited receivers can be connected. Universal Cross-Compatibility between all Bolt 4K DevicesConnect any Bolt 4K RX device, regardless of model or range. [NOTE: When pairing a Bolt 4K Monitor Module 1500 TX to a Bolt 4K Monitor Module 750 RX — or vice-versa — effective range will be 750ft. 1,500 feet of range is only accessible by pairing a TX 1500 with an RX 1500.] Camera MetadataTransmit metadata, timecode, and start/stop flags from most camera manufacturers. Bolt App for Android and Apple iOSRemotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools. BOLT 4K RECEIVER MODULE FEATURES Video: Up to 4Kp30 via HDMI /1080p60 via SDI Multicast: Up to 6 RXs Range: 1500 feet / 457 meter Inputs: HDMI 2.0 Compatibility: ALL Bolt 4K Receivers (Bolt 4K 750, Bolt 4K 1500, Bolt MAX, Bolt 4K LT 750, Bolt 4K LT 1500, Bolt 4K Monitor Module 750 RX, Bolt 4K Monitor Module 1500 RX) 10-bit, 4:2:2 HDR video output Powered by Teradeks BB3 chipset Camera Control Compatible TX Module easily attaches to the back of SmallHD Smart 7 monitors One power and video source for both the TX Module and Smart 7 Monitor

  Teradek Bolt 6 Monitor Module 750ft XT Wireless Video TransmitterThe Bolt 6 TX Monitor Module is a real-time wireless video transmitter that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Send color-accurate, 4K HDR videos in under 0.001 seconds.The Bolt 6 Transmitter Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set.Key features of the Bolt 6 TX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The Bolt 6 TX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 Transmitter Monitor Module offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay   What's In The Box? 1 x Bolt 6 Monitor Module 750 TX 1 x Hex L key 3/16" x 2 13/16" length 1 x Hex L key 2mm size 3-3/8" length 1 x Screw Socket Head Black 1/4-20 x 3/8" length 2 x Screw Socket Head Low Profile Black Oxide M3 x 20mm 2 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Lightstand Adapter 1/4-20in 1 x HDMI Adapter Bolt 4K TX Monitor Module   SmallHD Smart 7 Monitor (INDIE7, 702Touch, Cine7) is required and not included.  

  Teradek Bolt 6 Monitor Module 1500ft TX Wireless Video TransmitterThe Bolt 6 TX Monitor Module is a real-time wireless video transmitter that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Send color-accurate, 4K HDR videos in under 0.001 seconds.The Bolt 6 Transmitter Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set.Key features of the Bolt 6 TX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The Bolt 6 TX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 Transmitter Monitor Module offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Technical Specs Range: 1500ft/ 457m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay   What's In The Box? 1 x Bolt 6 Monitor Module 1500 TX 1 x Hex L key 3/16" x 2 13/16" length 1 x Hex L key 2mm size 3-3/8" length 1 x Screw Socket Head Black 1/4-20 x 3/8" length 2 x Screw Socket Head Low Profile Black Oxide M3 x 20mm 2 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Lightstand Adapter 1/4-20in 1 x HDMI Adapter Bolt 4K TX Monitor Module  

Bolt 4K LT is the newest entry-level wireless video system to be introduced to the Bolt 4K family. Bolt 4K LT devices are fully compatible with all other Bolt 4K devices, are capable of transmitting 10-bit, 4:2:2 HDR video at a range of up to 750 feet, 1500 feet or 5000 feet (with Array Antenna) line-of-sight over the unlicensed 5GHz band, and can multicast 6 receivers simultaneously. For HDR workflow, Bolt 4K LT supports the HDR-10, PQ and HLG standard and can transport extended camera metadata, timecode and record triggers over the wireless link.Real-Time 4K Wireless Video via HDMITransmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.Can transmit wireless video to all ranges of Bolt 4K devices - limited by shortest range device !True HDR ColorBolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.Rock-Solid ReliabilityBolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.Universal CompatibilityEach transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.Inputs/OutputsTransmitter: 1x 3G-SDI looping output & 1x HDMI 1.4bReceiver: 2x 3G-SDI, 1x HDMI 1.4bCamera MetadataSend start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.Bolt App for iOSRemotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand. FEATURES Video: Up to 4K30FPS (HDMI) Range: 750ft/ 228m Inputs: 3G-SDI, HDMI 2.0 (4Kp30) Outputs: 3G-SDI, HDMI 2.0 (4Kp30) Multicast: Up to 6 RXs Compatibility: Bolt 4K 750, Bolt 4K 1500, Bolt MAX, Bolt 4K LT 750, Bolt 4K LT 1500, Bolt 4K LT MAX, Bolt 4K LT HDMI, SmallHD Cine7 Bolt 4K Monitor Module, Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz