Teradek Bolt 6 LT 1500ft Wireless Transmitter/Receiver Deluxe V-Mount Set

Bolt 4K LT is the newest entry-level wireless video system to be introduced to the Bolt 4K family. Bolt 4K LT devices are fully compatible with all other Bolt 4K devices, are capable of transmitting 10-bit, 4:2:2 HDR video at a range of up to 750 feet, 1500 feet or 5000 feet (with Array Antenna) line-of-sight over the unlicensed 5GHz band, and can multicast 6 receivers simultaneously. For HDR workflow, Bolt 4K LT supports the HDR-10, PQ and HLG standard and can transport extended camera metadata, timecode and record triggers over the wireless link.Real-Time 4K Wireless Video via HDMITransmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.Can transmit wireless video to all ranges of Bolt 4K devices - limited by shortest range device !True HDR ColorBolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.Rock-Solid ReliabilityBolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.Universal CompatibilityEach transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.Inputs/OutputsTransmitter: 1x 3G-SDI looping output & 1x HDMI 1.4bReceiver: 2x 3G-SDI, 1x HDMI 1.4bCamera MetadataSend start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.Bolt App for iOSRemotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand. FEATURES Video: Up to 4K30FPS (HDMI) Range: 750ft/ 228m Inputs: 3G-SDI, HDMI 2.0 (4Kp30) Outputs: 3G-SDI, HDMI 2.0 (4Kp30) Multicast: Up to 6 RXs Compatibility: Bolt 4K 750, Bolt 4K 1500, Bolt MAX, Bolt 4K LT 750, Bolt 4K LT 1500, Bolt 4K LT MAX, Bolt 4K LT HDMI, SmallHD Cine7 Bolt 4K Monitor Module, Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz   

  Teradek Bolt 6 LT MAX Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 LT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 LT video Transmitter and Receiver.Key features of the Bolt 6 LT Set include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 also offers new tools for high-end users, including better visibility over connections and signals, adding confidence to the workflow no matter how challenging the environment. It additionally gives you access to our new Long Range Mode, offering better video quality at longer distances. A 5-pin USB adapter, sold separately, allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors.The included Transmitter, our most compact design ever, and the Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 LT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. And while the Bolt 6 LT Set has both 4K HDMI and 1080p SDI input and outputs, you can also select the Bolt 6 LT HDMI model if your production needs require HDMI only. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 3000+ feet / 914m of range up to 5000feet / 1540m with 4K Panel Antenna + broadcast mode 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options Available in HDMI-only version   Technical Specs Range: 3000ft/ 914m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz     What's In The Box? 1 x Bolt 6 LT MAX TX 1 x Bolt 6 LT MAX RX 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x Teradek Case Large - Bolt 6 LT TX/2RX 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Teradek Bolt 6 XT 1500ft Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.Key features of the Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 1500ft/ 457m LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on Transmitter Video Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 13,2x 9,1x 2,7 cm Dimensions Receiver: 11,2x 13,9x 2,7 cm Weight: Transmitter: 344g / 12.1oz Weight: Receiver: 430g / 15.2oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz    What's In The Box?   1 x Bolt 6 XT 1500 TX 1 x Bolt 6 XT 1500 RX 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 4 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA) 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable  

  Teradek Bolt 6 LT HDMI 750ft Wireless Transmitter/Receiver SetNext-gen 6GHz wireless connectivity up to 4K resolution in a compact, lightweight form factor, plus full 5GHz cross-compatibility across all Bolt 4K Series devices. Affordable HDMI-only solution is also available.The Bolt 6 LT HDMI Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 LT video Transmitter and Receiver.Key features of the Bolt 6 LT HDMI Set include 750 ft range, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 also offers new tools for high-end users, including better visibility over connections and signals, adding confidence to the workflow no matter how challenging the environment. It additionally gives you access to our new Long Range Mode, offering better video quality at longer distances. A 5-pin USB adapter, sold separately, allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors.The included Transmitter, our most compact design ever, and the Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter.Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. The Bolt 6 LT HDMI Set is 4K HDMI only. If you require both 4K HDMI and 1080p SDI input and outputs, you can also select the Bolt 6 LT model.   Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: HDMI 2.0 Outputs: HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 750ft/ 228m LOS Video Inputs: HDMI 1.4b Type-A receptacle Video Outputs: HDMI 1.4b Type-A receptacle Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box?   1 x Bolt 6 LT HDMI 750 TX 1 x Bolt 6 LT HDMI 750 RX 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 1 x Teradek Case Large - Bolt 6 LT TX/2RX 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable   Also available as V-Mount or Gold Mount Set, #10-2265-V or #10-2265-G  

Bolt 4K LT is the newest entry-level wireless video system to be introduced to the Bolt 4K family. Bolt 4K LT devices are fully compatible with all other Bolt 4K devices, are capable of transmitting 10-bit, 4:2:2 HDR video at a range of up to 750 feet, 1500 feet or 5000 feet (with Array Antenna) line-of-sight over the unlicensed 5GHz band, and can multicast 6 receivers simultaneously. For HDR workflow, Bolt 4K LT supports the HDR-10, PQ and HLG standard and can transport extended camera metadata, timecode and record triggers over the wireless link.Real-Time 4K Wireless Video via HDMITransmit uncompressed video in 1080p and 2160p at 30FPS with less than 1ms of delay. Up to 1500 ft. of range.Can transmit wireless video to all ranges of Bolt 4K devices - limited by shortest range device !True HDR ColorBolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.Rock-Solid ReliabilityBolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.Universal CompatibilityEach transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.Inputs/OutputsTransmitter: 1x 3G-SDI and 1x looping output & 1x HDMI 2.0Receiver: 1x 3G-SDI, 1x HDMI 2.0Camera MetadataSend start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.Bolt App for iOSRemotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand. FEATURES Video: Up to 4K30FPS (HDMI) Range: 1500ft/ 458m Inputs: 3G-SDI, HDMI 2.0 Outputs: 3G-SDI, HDMI 2.0 Multicast: Up to 6 RXs Compatibility: Bolt 4K 750, Bolt 4K 1500, Bolt MAX, Bolt 4K LT 750, Bolt 4K LT 1500, SmallHD Cine7 Bolt 4K Monitor Module, Technical Specs Range: 1500ft/ 458m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 2x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz    

  Teradek Bolt 6 LT 750ft Wireless Transmitter/Receiver SetThe Bolt 6 LT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 LT video Transmitter and Receiver.Key features of the Bolt 6 LT Set include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 also offers new tools for high-end users, including better visibility over connections and signals, adding confidence to the workflow no matter how challenging the environment. It additionally gives you access to our new Long Range Mode, offering better video quality at longer distances. A 5-pin USB adapter, sold separately, allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors.The included Transmitter, our most compact design ever, and the Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 LT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. And while the Bolt 6 LT Set has both 4K HDMI and 1080p SDI input and outputs, you can also select the Bolt 6 LT HDMI model if your production needs require HDMI only. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options Available in HDMI-only version Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Dimensions Receiver: 12x 9,4x 2,7 cm / 4.8"x 3.7"x 1" Weight: Transmitter: 206g / 7.3oz Weight: Receiver: 292g / 10.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX 1 x Bolt 6 LT 750 RX 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x Teradek Case Large - Bolt 6 LT TX/2RX 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Ace 750 is a lightweight, compact, HDMI wireless video system with built-in antennas designed to be used with mirrorless cameras, camcorders, action cameras and A/V workflows. It sends uncompressed zero-delay, 4Kp30, HDR video and audio with up to 750 feet (230m) of range. Ace 750 is cross-compatible with Bolt 4K and Bolt 6 in 5GHz and 6GHz modes and is fully compliant with FCC and CE frequency usage and power output guidelines. Ace 750 features an integrated hole pattern for mounting and can be powered with NP-F or LP-E6 batteries using an optional L-shaped plate.The transmitter (TX) and receiver (RX) units automatically detect and select the 5Ghz or 6GHz RF channel with the least interference and employ Auto-Frequency Switching to maintain optimal signal quality. Ace comes paired out of the box. The TX can send video to up to six RX devices at the same time using the Bolt Manager app for iOS or Android.Ace 750 is built with the same reliable wireless technology found in our acclaimed Bolt product line. Because of this, Ace 750 is fully compatible with all Bolt 4K and Bolt 6 models. Features 4Kp30 10-bit HDR Zero-Delay wireless video (<0.001sec) Range: 750 feet / 228 m 6GHz auto frequency switching Multi-receiver capable - up to 6 Receivers per Transmitter 2x 2dBi internal antennas (AMC mode always on) Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: 1x HDMI 1.4b Type-A receptacle Color Sampling: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: Barrel conntecotr 7-18V Power Consuption: 6 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto only, 40 MHz only, no blocked frequencies Dimensions Transmitter: 11,2 x 8,1 x  2,54 cm / 4.39" x 3.19" x 1"Mountability: Multiple mounting options with M3 and 1/4-20” holes Weight: Transmitter: 187 g / 6.6 oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OLED display - Input video format, Selected frequency, Video Quality %, Link statusSwitched: On/Off Switch Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60  What's In The Box? 1 x Ace 750 Transmitter 1 x Ace 750 Receiver 1 x Lightstand Adapter 1/4-20in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A - HDMI Male Type A - 18in Cable 1 x PSU 18W AC Adapter 12VDC - 6ft Cable 1 x PTap to r/a barrel - 18in Cable    

  Bolt 6 RX Monitor Module is a wireless video receiver that supports up to 4K30 10-bit 422 HDR video. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With this direct integration, the Bolt 6 and Smart monitor can share power and video, allowing you to reduce the amount of cables on set. With the Bolt 6 Monitor Module, Wireless Camera-Control is also possible because it integrates directly into SmallHD Smart Monitors. Bolt 6 Monitor Module RX offers two line-of-sight options: 750 ft. and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates.The 750 model includes V (vertical) Antennas. 1500 model includes both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 Monitor Module RX can include a permanent internal antenna to allow for reliable zero-delay transmission in a more compact and durable form factor. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay  What's In The Box? Bolt 6 Monitor Module 750 RX V-Mount HDMI Adapter Bolt 4K RX Monitor Module    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX Int. Antennas 1 x Bolt 6 LT 750 RX V-Mount Int. Antennas 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX 1 x Bolt 6 LT 750 RX 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Teradek Bolt 6 XT 750ft Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.Key features of the Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on Transmitter Video Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 13,2x 9,1x 2,7 cm Dimensions Receiver: 11,2x 13,9x 2,7 cm Weight: Transmitter: 344g / 12.1oz Weight: Receiver: 430g / 15.2oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 XT 750 TX 1 x Bolt 6 XT 750 RX 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable    

  Teradek Bolt 6 XT MAX Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.Key features of the Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Technical Specs Range: 3000ft/ 914m LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on Transmitter Video Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 13,2x 9,1x 2,7 cm Dimensions Receiver: 11,2x 13,9x 2,7 cm Weight: Transmitter: 344g / 12.1oz Weight: Receiver: 430g / 15.2oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz    What's In The Box?   1 x Bolt 6 XT MAX TX V-Mount 1 x Bolt 6 XT MAX RX V-Mount 2 x Bolt 6 XT Battery Cover Plate Front 1 x Bolt 4K TX Mounting Bracket 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 4 x Screw Flat Head Phillips 2 x Screw Socket Cap A S, M3 x 16mm 1 x Hex L key 2.5mm size 3-5/8" length 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 1 x (Bit 718) 2pin Conn. to 2pin Conn. (Alexa) 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5") 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable 2 x Bolt 6 XT Battery Cover Plate Rear  

The Bolt 6 Color Bands from Teradek are designed for the Bolt 6 Transmitters and Receivers. They fit atop of your Bolt TX and RX so as to help differentiate which units are paired together.   Choose from XT or LT kits of 8 bands, or select single color bands to suit your needs.     The XT Kit includes   Bolt 6 XT TX Color Band (Red Rubber) Bolt 6 XT TX Color Band (Yellow Rubber) Bolt 6 XT TX Color Band (Green Rubber) Bolt 6 XT TX Color Band (Blue Rubber) Bolt 6 XT RX Color Band (Red Rubber) Bolt 6 XT RX Color Band (Yellow Rubber) Bolt 6 XT RX Color Band (Green Rubber) Bolt 6 XT RX Color Band (Blue Rubber)     Part no. for single rubber bands - LT - Transmitter: Red: #11-0915Blue: #11-0918Yellow: #11-0916Green: #11-0917 Part no. for single rubber bands - LT - Receiver: Red: #11-0919Blue: #11-0922Yellow: #11-0920Green: #11-0921